Diary and Events
FIVE, Farnborough(GU14 6XL)
21/03/2017(09:30) - 23/03/2017
The UK's LARGEST regional manufacturing technology, electronics and subcontracting exhibition. (more)
Messe Stutgart, Germany
28/03/2017 - 30/03/2017
As the world’s leading exhibition for the fastener and fixing industry Fastener Fair Stuttgart (more)
Manchester Central Convention Complex(M2 3GX)
04/04/2017 - 05/04/2017
Industry 4.0, the 4th industrial revolution, smart manufacturing, digital factories…these are (more)
Arena MK, Milton Keynes(MK1 1ST)
The new Machine Vision Conference & Exhibition gives you insight into the latest developments in (more)
Correct lubrication is vital to ball screw life
Mike Chipchase, product line specialist for Thomson Linear Components Group, Europe, provides a guide to ball screw lubrication.
A properly selected lubricant minimises friction, reduces torque, increases a screw's efficiency, and extends life. Lubricants maintain the low friction advantage of ball screw assemblies by minimising rolling resistance between balls and grooves and sliding friction between adjacent balls.
A ball screw assembly must be thoroughly cleaned to remove all contaminants before lubrication and re-lubrication. Contamination is a leading cause of premature failure of ball screws. Proper lubrication helps keep most contaminants out, greatly reducing the damage they can cause. Rust preventative oil used for shipping and storage of the components should be wiped clean before application of the final lubrication.
Lubricants are often taken for granted, but the right choice for each application ensures a ball screw that performs properly for its calculated life. Both oil and grease provide corrosion protection, but lubricant choice depends on evaluation of the advantages and disadvantages of each in the given application.
Moisture and contaminants
You can apply oil at a controlled flow rate directly to the point of need, and it will clean out moisture and other contaminants as it runs through the ball nut. It can also provide cooling. Disadvantages include:
Ball screws must be lubricated to operate properly to achieve the rated life. Greases can be applied directly to the screw threads near the root of the ball track or pumped into the ball nut if lube holes are provided.
Synthetic greases offer many performance advantages over mineral-based lubricants. They function over wider temperature ranges, offer greater stability and retain the viscosity needed to provide an adequate film thickness through a specified range of operating temperatures, speeds and loads.
Special additives can improve the grease's ability to resist contaminants, reduce wear in the presence of load and vibration, reduce friction, decrease noise and increase load capacity. Do not use greases with graphite or molybdenum disulfide as these provide too low friction which promotes ball skid and interferes with the rolling process of the ball bearings.
Specialty greases are also available which include but are not limited to vacuum grade, food grade, clean room, and extreme temperatures. Match the grease selection to the application environment and then select based on performance requirements. Precision ground ball screws, with precise motion and smooth, quiet operation, can also take advantage of filtration technology. Additional filtration results in cleaner lubricants, improved homogeneity of the thickening agent and removal of virtually all particulate matter.
One problem with grease is that it tends to be fed out of the nut and onto the ball screw, accumulating at the extremities of travel where it collects contaminants. It must be replenished regularly and any excess removed leaving only a thin film of lubrication on the screw shaft at all times.
Greases consist of mineral or synthetic oil, additives, and a thickening agent such as lithium, bentonite, aluminium, and barium complexes. NLGI (National Lubricating Grease Institute) Grade is a widely used classification for lubricating greases. Greases are classified in one of nine grades based on their consistency. Lower numbers are softer and flow better, while higher numbers are firmer, tend to stay in place, and are a good choice when leakage is a concern. NLGI Grade alone is not sufficient for specifying grease for a particular application but is a useful qualitative measure.
As a rule of thumb, replenish grease at least every 600-800 hours. However, because conditions vary so widely, you should confirm this interval by inspection and readjust if needed. For extreme conditions, consult a lubrication expert or ball screw manufacturer.
All ball screw assemblies should be run smoothly throughout the entire stroke. If the torque is not uniform over the entire stroke:
In conclusion, we can see that the right oil or grease lubrication for ball screw assemblies reduces unscheduled downtime for repair by ensuring that the assemblies deliver their expected service life.
Other News from Thomson Linear Motion
Latest news about Lubricants