Free white paper supports compliance with machinery safety standard EN 60204-1
TodaySafe Machine has published a new white paper, 'EN 60204-1 for machine builders and panel builders – a guide to avoiding common errors'. Running to fourteen pages, the free publication presents many ways in which machinery often fails to comply with this safety standard's requirements.
Can technology save the planet?
TodayCan technology save the planet? The sentiment at the World Economic Forum annual conference in Davos evoked an overwhelming yes. Next generation technologies have undeniable potential. Yet, the success of these technologies hinges on how we navigate their implementation. Stefan Reuther, member of the executive board at COPA-DATA, reflects on the World Economic Forum (WEF) annual conference – what change is required to achieve the twin transition?
Compact low-cost energy chain designed for drawers
Todayigus has launched the draw-e-chain for cable routing in drawers and pull-out applications like server racks. Thanks to its minimal structural design, this compact energy chain costs 30% less than that of the most cost-effective standard e-chains. This prevents costly oversizing, especially if the application is only moved infrequently.
Quality and economy with mass customisation
TodayNabtesco has long adopted the production concept of mass customisation, ensuring fast delivery of individual, high-performance and cost-effective gear solutions.
Innovative motion solutions are supporting the latest trends in robotics
4 days agoMotors with increasing torque density and dynamics are helping robot designers improve precision and control, as Portescap’s Julian Del Campo, Paul Schonhoff, and Guillaume Mougin, explain.
HMI management system requires no installation or programming skills
4 days agoKEB Automation and HMI Project have joined forces to meet today’s challenges, offering the HELIO HMI management system. Its responsive design ensures that only one HMI is configured and can then be used on different panels and mobile devices. It is easy to use and requires no installation or programming skills or specialist knowledge.
Innovative motion solutions are supporting the latest trends in robotics
4 days agoMotors with increasing torque density and dynamics are helping robot designers improve precision and control, as Portescap’s Julian Del Campo, Paul Schonhoff, and Guillaume Mougin, explain.
Emotors adopts Siemens’ Simcenter solutions
6 days agoSiemens Digital Industries Software reports that Emotors, an independent e-drive manufacturer, has taken advantage of test solutions from the Siemens Xcelerator portfolio of industry software to aid in the development and constant improvement of its e-drive systems for hybrids, plug-ins and full electric vehicles (EVs).
Delta empowers Tecnobox with cutting-edge automation in box forming machinery
4 days agoDelta’s automation solutions have played a pivotal role in enhancing the production capabilities of Tecnobox, a box forming machinery company in Spain. This transformation has not only fortified Tecnobox's position in a competitive market, but it has also set new standards in the industry for technological advancement and environmental responsibility.
Torque sensor with separate sensing head can probe deep into machinery
5 days agoSensor Technology has extended its new range of torque sensors with a model that has the sensing head and electronics in separate housings. This has two advantages: the sensing head can fit into very confined spaces, and the electronics can be located in a position where they are protected from physical damage, dust, dirt, moisture, electromagnetic forces, etc.
Robust mid and high-range locks with excellent IP sealing
11 days agoFDB Panel Fittings reports that its Online store now offers ex-stock mid and high-range enclosure lock programs which include quarter turn latches, locks, wing-knobs, spanner locks, all with excellent IP ratings, typically to IP65 degrees of sealing.
Quick and comprehensive reporting of Product Carbon Footprint
3 days agoAs a global leader in adhesives, sealants and functional coatings Henkel Adhesive Technologies is constantly driving sustainability based on its Sustainability Ambition 2030. Now a novel digital solution is enabling quick and comprehensive reporting of Product Carbon Footprint (PCF), and has been certified by TÜV Rheinland.
Screws for plastic have low installation torque and resist vibration
5 days agoStaytite’s Stayplas 30° screws for plastic are high-performance fasteners that have been engineered with precision and innovation. These screws offer a number of advantages that make them the ideal choice in plastic applications.
Industrial Technology Magazine - Spring 2024
Cover Story
2 Opportunities to drive your machine performance, from the innovators in valve terminals
Industry Update
8 Machine builders not yet reaping reaping benefits of digital transformation
10 Generating green power from ancient windmills
12 Who might be the potential purchasers for Innomatics?
14 Schneider Electric celebrates EcoCare launch at new Experience Centre
15 Millions of pounds written off by UK manufacturers
Design Engineering
19 Considerations for choosing an LED potting compound
20 Durability and customisation for fume cupboard controls
22 Operational security for enclosures
24 There’s more to making a spring than you might think
26 Designing with springs in non-standard materials
28 The right battery pack for a mobile industrial robot
Machine Building and Automation
31 Optimise helical gear design to minimise audible noise
32 Moving away from big data toward smart data
34 Machining of lead screws to meet individual needs
36 Machine safety indication can greatly increase productivity
38 New motor driven the roller is most powerful on the market
40 Custom linear motion solution drives hydro research project
42 Automation achieves perfect Easter egg flavour combos
44 From mass production to mass personalisation
46 The transition from electric drives to intelligent drives
48 Build your own AMR with IDEC Safety Wheel Drive
Food Manufacturing Live
A 20 page preview of Food Manufacturing Live, taking place at the National Motorcycle Museum, Birmingham on 1st May 2024