Share
Industrial Technology - Linked-in Industrial Technology - Twitter Industrial Technology - News Feed
Latest Issue
Select a Category
Features, exhibitors & specials
Aluminium frameworks
Batteries, UPS and power supplies
Bearings and slides
Belt and chain drives
Brakes, clutches and couplings
CAD, workstations and computers
Drives and motion control systems
Enclosures, cabinets, fans and Electrical
Enclosures
Cabinets
Fans
Cables - electric
Small plastic cases
Panel Components
Engineering services and Exhibitions
Fasteners and adhesives
HMIs, displays and input devices
Hydraulic components
Machine Building
Marking and labeling systems
Materials
Motors, gears and gearboxes
PLCs and industrial computers
Pneumatic components
Robotics & positioning systems
Pumps, valves, compressors & blowers
Safety products
Seals and gaskets
Sensors and systems
Small mechanical components
Springs, gas springs and dampers
Diary and Events

Industry 4.0 Summitt

Manchester Central (M2 3GX)

28/02/2018 - 01/03/2018

Industry 4.0, the 4th industrial revolution, smart manufacturing, digital factories…these are (more)

Drives & Controls 2018

NEC, Birmingham(B40 1NT)

10/04/2018 - 12/04/2018

Drives & Controls exhibition is recognised as the UK’s leading show for Automation, Power (more)

UKIVA Machine Vision Conference

Arena MK(MK1 1ST)

16/05/2018

Following a successful launch in 2017, UKIVA Machine Vision Conference returns to Arena MK, Milton Keynes, (more)

Select Companies begining with:
3
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
                  W
X
Y
Z
                     
Total: 490
Assured moisture protection in missile containers
Sensitive military electronics and electro-optic equipment need to be manufactured and stored in conditions where the impact of moisture is minimised. The sensitive components that make this technology so powerful are all located in the nose of the missile. This therefore becomes the part of the (more...)
Enclosure positioning is as important as specification
A TV property pundit once said that the three most important factors to consider when assessing a building where location, location and location. According to Chris Lloyd of Spelsberg the same adage holds true when choosing where to position electrical enclosures. He takes us through the correct (more...)
IP66 enclosures now in ten sizes
Rolec’s technoBOX ABS electronic enclosures are now available in 10 sizes, many of which are compatible with other standard products. The company says the tough modern technoBOX is a cost effective range of enclosures suitable for a wide range of industrial electronic and electrical (more...)
Protecting sensitive equipment in the field
A highly unusual equipment shelter for protecting field-instrumentation and automation makes all the system components that are required for normal operation accessible via the exterior of the building. This 'inside out' design approach can dramatically reduce shelter sizes, and greatly simplify (more...)
Rack enclosures enable global network infrastructure to expand
Some 98% of all intercontinental telephone calls, internet traffic, emails, messaging and private data traffic is carried as digital data by fibre optic cables laid by specialist ships across the world’s oceans. Today’s cables, typically 25mm in diameter and weighing some 1.5 tonnes/km, (more...)
Verotec Ltd
Slimline motor controllers create space in enclosures
Small drives for machines and equipment are typically powered up to 9.0 A, and are protected by conventional motor circuit breakers. However, when space in the enclosure is limited, it is very difficult to find room for significant numbers of protective components. Rittal’s new motor (more...)
Custom enclosures at Southern Manufacturing
CamdenBoss is highlighting a number of new products including IP68 Flat Sheet Plastic Technology (FSPT) custom enclosures, a comprehensive range of circular connectors, an extensive range of electrical enclosures, new 2.54mm and screwless CamBlock Plus terminal blocks plus additional enclosures in (more...)
Camden Boss Ltd
Combating condensation in enclosure installations
The recipe for condensation is simple: water vapour and fluctuating temperatures. In all but the most controlled of environments this means that electrical installations are at risk of water damage caused by condensation forming inside an enclosure. Of course, with proper planning and design (more...)
Considerations for specifying an enclosure latching system
James Stroud of Southco examines the importance of integration between the key elements of a rotary latching system commonly found on enclosures, and talks through some key considerations for specifying complete latching systems. They say that the whole is greater than the sum of its parts – (more...)
Southco
Suspension arm assemblies from ETA
Just introduced by ETA Enclosures UK and offered in three specification variations subject to weight requirements is a new range of ETR Suspension Arm assemblies. The structure of the support arm system is defined by machine size, enclosure dimensions and enclosure weight, the number of connection (more...)
Additional Information
Text styles