Industrial Technology
Document
Share
Industrial Technology - Linked-in Industrial Technology - Twitter Industrial Technology - News Feed
Latest Issue
Select a Category
Features, exhibitors & specials
Aluminium frameworks
Batteries, UPS and power supplies
Bearings and slides
Belt and chain drives
Brakes, clutches and couplings
CAD, workstations and computers
Drives and motion control systems
Enclosures, cabinets, fans and Electrical
Engineering services and Exhibitions
Fasteners and adhesives
HMIs, displays and input devices
Hydraulic components
Machine Building
Marking and labeling systems
Materials
Motors, gears and gearboxes
PLCs and industrial computers
Pneumatic components
Robotics & positioning systems
Pumps, valves, compressors & blowers
Safety products
Seals and gaskets
Sensors and systems
Small mechanical components
Springs, gas springs and dampers
Select News from
2018
2017
2016
2015
2014
2013
2012
2011
  November 2011
  September 2011
  August 2011
  July 2011
  June 2011
  May 2011
  March 2011
  February 2011
2010
2009
2008
2007
2006
Diary and Events

Industry 4.0 Summitt

Manchester Central (M2 3GX)

28/02/2018 - 01/03/2018

Industry 4.0, the 4th industrial revolution, smart manufacturing, digital factories…these are (more)

Drives & Controls 2018

NEC, Birmingham(B40 1NT)

10/04/2018 - 12/04/2018

Drives & Controls exhibition is recognised as the UK’s leading show for Automation, Power (more)

UKIVA Machine Vision Conference

Arena MK(MK1 1ST)

16/05/2018

Following a successful launch in 2017, UKIVA Machine Vision Conference returns to Arena MK, Milton Keynes, (more)

Select Companies begining with:
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
                    Y
Z
                       
Total: 68
Airknives reduce clean-down times
TasteTech, specialist manufacturer of 'controlled release' flavourings and ingredients for applications in bakery, confectionery and chewing gum products has recently increased production and cut machine clean-down times by employing airknives in a novel way. The airknives are employed in a (more...)
Published: - 30th November 2011
CC-Link ‘Unlocks China’ webinar
CC-Link's Gateway to China program can increase your success in the Chinese marketMany well known European companies understand the importance of the CC-Link open network for success in the Chinese market. In many industries, such as flat panel displays and automotive, it's a de-facto standard. Our (more...)
Published: - 30th November 2011
Helping users avoid the costs of bearing contamination
The costs associated with premature bearing replacement, as a result of failure due to contamination, can be considerable. In addition to the replacement cost of the bearing itself, and the time and effort involved in sourcing and physically replacing it, there is the cost of unplanned plant and (more...)
Published: - 30th November 2011
Load cell tough enough for rocket testing
Model 41 load cells with dual bridge configuration supplied by measurement specialists RDP Electronics Ltd are in demand from UK based rocket motor manufacturing facilities for use in testing programmes. Because rocket engine testing is expensive to set up, good quality and verified data from the (more...)
Published: - 30th November 2011
Restored water mill generates clean power
A former water mill, sited on the River Cosa at Travesio in northern Italy, has been renovated and converted into a micro-hydroelectric scheme using the Archimedes' screw concept, saving some 500 tonnes of carbon dioxide emissions per year. The control of the system and the interface between the (more...)
Published: - 30th November 2011
Specialised Fastener Products joins the TFC Group
TFC Europe, a leading supplier of technical fastener components to industry, is pleased to announce the acquisition of Specialised Fastener Products (SFP). Based in Colchester, Essex, SFP was established in 1989 by Paul and Sindy Jepp. Their focus was to provide threaded fastener technology to (more...)
TFC
Published: - 30th November 2011
The Lenze online Advent Calendar is all about motion centric automation
It simulates a juggler with robotics and mechanical handling in a high rack storage system. The Lenze online Advent Calendar is busy handling 24 baubles, one for each day leading up to Christmas. The intention is to present the concept of motion centric automation in a way that is interesting and (more...)
Published: - 30th November 2011
X20 System certified for maritime use
After extensive testing by the certification institute Germanischer Lloyd (GL), the B&R X20 System has achieved the coveted seal of quality for maritime applications. All of the X20 modules tested - CPUs, I/O modules and bus controllers - proved they have what it takes to meet the high demands (more...)
Published: - 30th November 2011
AC drive manufacturer Vacon will announce a new product family of compact AC drives at the electric automation fair SPS/IPC/DRIVES 2011 in Nuremberg, Germany on 22 November 2011. Optimized for the needs of original equipment manufacturers, the new product range further strengthens Vacon's (more...)
Vacon Drives
Published: - 14th November 2011
To promote the benefits of Ethernet POWERLINK connectivity, the Ethernet POWERLINK Standardization Group (EPSG) is holding a series of conferences across Europe. ASCO Numatics, together with three other market leading companies, are organising the event. During the conference, ASCO Numatics will be (more...)
Published: - 9th September 2011
Additional Information
Text styles