Predicting future changes in water quality

maxon helps Dublin City University engineer new technology for monitoring aquatic environments

As the impact of climate change and land use continue to harm aquatic environments, it is becoming increasingly important to measure and monitor changes in water quality. When Dublin City University (DCU) Water Institute was developing its new mobile lab technology to help predict future changes in water quality, it turned to precision drive and motor specialist maxon for help.

The project, led by Professor Fiona Regan, Joyce O’Grady, a PhD student at DCU, and Dr Nigel Kent, then the director of the centre of research and enterprise in engineering (engCORE) at the Institute of Technology Carlow. The project was sponsored by the Irish Marine Institute and involves studying freshwater sites where the quality is good and monitoring any changes that could impact the ecosystem.

The team developed a sensor to detect low phosphate levels in selected catchments for real-time monitoring. Phosphates are a measure of nutrient pollution and control the pace at which algae and aquatic plants are produced. To mix and measure the water sample and the reagent fluid, O’Grady and Kent developed a centrifugal microfluidic disk that acts like a mobile lab, with six tests per disk. The ability to use a mobile lab reduces the risk of contamination, delivers a faster turnaround for results and produces real-time data.

Support from maxon

When they needed support developing the disk, Kent contacted Martin Leahy, maxon’s sales engineer in Ireland, who specified a DCX 22 mm DC motor and the robust ENX 10 EASY 3-channel encoder for the necessary high precision and speed control. Also, modifications were made to the shaft length, since a longer shaft was required with a flat edge to mount the disk.

It was critical that the motor could spin above 5,000 to 6,000 rpm to drive fluids towards the outside of the disk for at least 60 seconds and, at the measurement stage, index the disk through 60 degree increments with sub 1 degree precision. The DC motor and encoder form part of a more extensive integrated firmware system. The system needed to be fully integrated with minimal sample handling to lessen contamination.

Leahy also introduced the team to maxon’s Young Engineers Program (YEP). Aimed at students and start-up companies, this supports innovative projects with electric drive systems. It offers technical support, maxon products at discounted prices and promotion opportunities on maxon channels.

Invaluable insights

“I assumed pricing would be a barrier, but the YEP made it a no-brainer, as maxon products would have always been on my wish list. The level of customisation available, especially at such low volumes, was impressive and Martin’s advice has been invaluable to the project,” adds Kent. “I had previously only considered maxon products in final applications but not for prototyping.”

The sensor is now fully validated, and studies are continuing in other areas with the full device. One study has been completed on the River Liffey, and another is due in a lower catchment area. The system will be replicated for four more studies to complete the project in its fifth year.

“Industry 4.0 is finding its way into many different industries. The kind of system that Joyce is developing will be prevalent; autonomous sensors that you can leave out and get real-time feedback on the state of rivers or lakes will play a huge role in areas like Agriculture 4.0. For example, the interconnected nature of technology, using drones for smarter spraying, reduces water runoff, which helps prevent water pollution and protects our drinking water resources. This will be the industry focus over the next decade,” concludes Kent, currently assistant professor in the school of mechanical and manufacturing engineering in DCU.

Dublin City University (DCU) is part of Beyond 2020, a research cluster consisting of six Irish and UK institutes examining new technologies for monitoring environmental waters to understand the role of aquatic ecosystems in a changing global environment.

When Dublin City University (DCU) Water Institute was developing its new mobile lab technology, it turned to maxon for help.
When Dublin City University (DCU) Water Institute was developing its new mobile lab technology, it turned to maxon for help.


Maxon House
Hogwood Lane
RG40 4QW

+44 (0)118 9733337

Nabtesco delivers solutions for every drive application
To continue meeting increasing demand, Nabtesco is substantially expanding its production capacities with the construction of a new factory in Hamamatsu, 250 km southwest of the its headquarters in Tokyo – which will double the annual production capacity to two million precision gearboxes by 2026.
Festo showing ‘Progress in Motion’ at PPMA 2022
The Festo stand at PPMA 2022 will focus on key applications for the process and packaging sector. These include innovative process valve controls, servo-controlled flow wrapping and a new solution for controlling web tension with dancing rollers.
IFM Electronic makes IIoT easy at PPMA 2022
At this year’s PPMA Show, IFM Electronic is focusing on its moneo IIoT platform. This has been developed specifically to provide a convenient solution to the challenge of converting the huge amount of data produced by modern plant and machines into useful information that can be used to reduce downtime, optimise efficiency and cut costs.
Bürkert extends capabilities with Fine Controls partnership
The key distribution partner agreement between Bürkert and Fine Controls brings OEMs or end users in process control a distributor who can supply all the parts necessary to build a complete process system, as well as offering design and specification support.
Individual service for signal integrity
The demands on connection technology performance are constantly increasing. By providing customised support, Phoenix Contact helps customers select connection components to ensure the highest possible signal integrity.
Aveva MES rises in the leader ranks of the latest Gartner report
Aveva’s Manufacturing Execution Systems (MES) offering, which is deployed in the UK & Ireland by AVEVA Select partners SolutionsPT, has been recognised as a global leader in industrial software in the latest 2022 Gartner Magic Quadrant for Manufacturing Execution Systems.
Siemens selected by Microsoft for RAMP Programme
Siemens Digital Industries Software has been selected to participate in the Rapid Assured Microelectronics Prototypes (RAMP) Phase II initiative.
Thomson Industries exhibits linear actuators for the marine industry
Thomson Industries will be exhibiting at the 30th Shipbuilding, Machinery and Marine Technology (SMM) trade fair in Hamburg in September, showcasing its comprehensive line of electric linear actuators for marine applications.
Harwin and MSA Components sign German distribution deal
Harwin is bringing greater strength to its German supply chain through a new strategic partnership with MSA Components. The agreement allows MSA to offer all the latest products from Harwin’s extensive portfolio.
Mould making at Emka for injection moulding of plastics and metals
Emka reports that it is now one of the top three mould makers in Europe – producing 900 moulds a year for plastic injection, including polyamide/glass and Grivery, as well as zinc and aluminium die casting.

Login / Sign up