Share
Industrial Technology - Linked-in Industrial Technology - Twitter Industrial Technology - News Feed
Latest Issue
Diary and Events

Industry 4.0 Summit

Manchester Central Convention Complex(M2 3GX)

31/03/2020 - 01/04/2020

The UK’s leading conference gathering of senior level executives from the UK manufacturing industry (more)

Drives & Controls Exhibition

NEC, Birmingham(B40 1NT)

21/04/2020 - 23/04/2020

The show brings together key suppliers of state-of-the-art equipment representing the multi-tasking culture (more)

UKIVA Machine Vision Conference 2020

Marshall Arena, Milton Keynes(MK1 1ST)

14/05/2020

Vision solutions have been applied in almost any industry you can think of. Food, beverage, pharmaceutical, (more)

PPMA Show 2020

NEC, Birmingham(B40 1NT)

29/09/2020 - 01/10/2020

PPMA Show 2020 is the UK’s largest ever event dedicated to state-of-the-art processing and packaging (more)

Advanced Engineering 2020

NEC, Birmingham(B40 1NT)

04/11/2020 - 05/11/2020

The UK's largest annual advanced manufacturing trade show, Advanced Engineering is your opportunity to (more)

High accuracy, non-contact magnetic position indicator

High accuracy, non-contact magnetic position indicator The new magnetic measurement system from Elesa utilises a magnetic band and non-contact sensor to provide highly accurate repeatable measurements for industries such as furniture/wood working, window frame assembly, steel frame builders etc. Typically the magnetic strip is fixed to the machine bed, e.g. cross cut saw or milling equipment, with the sensor and indicator mounted on the travelling feed part. The system can be set up for simple linear measurement in millimetres/inches and for angular measurement in degrees, with an accuracy of 0.1mm and repeatability of 0.01mm.

The Elesa system is characterised by extremely easy assembly, and by virtue of its simple accurate measurement it enables precise positioning alignment so reducing time by keeping machinery procedures to a minimum. The non-contact feature of the system means that it is not subject to wear and tear and therefore does not require maintenance. Similarly, without direct contact it is not affected by moisture, dust, oils and process residues - it is also insensitive to vibration for the same reason.

The position indicator MPI-15 may be set to read out measured values in absolute or incremental mode (to make relative measures within the measuring range), to select the unit of measure (mm, inches or degrees) and the counting direction and to set the offset values to compensate for tool wear. The MPI-15 incorporates a self-diagnostic battery check, sensor check and magnetic tape check. It is powered by an external battery 1.5 VDC and is equipped with a buffered memory during battery substitution. Battery life is 1 1/2 year typical.

The magnetic band M-BAND-10 is easily assembled thanks to an adhesive backing and it is protected against mechanical damage by a stainless steel cover strip.
 

Other News from Elesa [UK] LTD

Upgrade delivers faster changeovers

Latest news about Sensors and systems

Additional Information
Text styles