Share
Industrial Technology - Linked-in Industrial Technology - Twitter Industrial Technology - News Feed
Latest Issue
Diary and Events

Southern Manufacturing

Farnborough, Hants(GU14 6TQ)

20/04/2021 - 22/04/2021

Southern Manufacturing and Electronics is the most comprehensive annual industrial exhibition in the (more)

PPMA Show 2021

NEC, Birmingham(B40 1NT)

28/09/2021 - 30/09/2021

PPMA Show 2021 will be the UK’s largest ever event dedicated to state-of-the-art processing and (more)

Advanced Engineering 2021

NEC Birmingham(B40 1NT)

03/11/2021 - 04/11/2021

Join us in our 12th and most important edition to date, as we invite engineers and management from all (more)

New multi-stage mag-drive centrifugal pumps provide more pressure at low flows

New multi-stage mag-drive centrifugal pumps provide more pressure at low flows

The established and successful Finish Thompson DB Series range of leak-free, magnetically driven centrifugal pumps has been extended following the addition of two new multi-stage pumps. Available from pumping specialist Michael Smith Engineers these new models have two impellers (the MSDB2) or three impellers (the MSDB3). This means they can generate more pressure at low flows, which means in some applications they can be used as a smaller, less expensive pump.

Available in a choice of polypropylene or PVDF, the MSDB pumps are ideal for low flow / high head pumping applications, covering flows to 16 m³/hr and differential heads to over 60 metres with minimum flow capabilities as low as 5 lit/min. In addition to the benefit of higher pressure / at lower flows performance these new models offer the important advantages of DB pumps thanks to their magnetic drive technology; no seals to replace and zero leakage.

They feature Neodymium-Iron-Boron inner magnets which is acknowledged as one of the most powerful and efficient magnetic materials available, completely encapsulated in unfilled polypropylene or PVDF for superior magnet protection and outstanding chemical resistance. The outer drive allows measurement-free drive installation for perfect magnet alignment and therefore maximum power transmission.

A wide variety of optional components and materials are available to suit more demanding applications and when fitted with chemical grade carbon bushing, DB pumps can be dry-run for extended periods without damage as the temperature of the shaft remains cool for hours. Shafts are available in high purity alumina ceramic, Hastelloy C, or SiC.

MSDB pumps can be mounted to NEMA and IEC motors and a variety of connections including NPT or BSP threads, adjustable flanges or union fittings make it easy to connect to most process systems, reducing installation time and cost. Vertical installation is also an option with IEC motor frames.

Typical applications for these new models include chemical transfer and processing, electroplating, water and waste water transfer, circuit board manufacture and pharmaceuticals.

 

Latest news about Pumps, valves, compressors & blowers

Additional Information
Text styles