Industrial Technology - Linked-in Industrial Technology - Twitter Industrial Technology - News Feed
Latest Issue
Diary and Events

Advanced Engineering 2020

NEC, Birmingham(B40 1NT)

04/11/2020 - 05/11/2020

The UK's largest annual advanced manufacturing trade show, Advanced Engineering is your opportunity to (more)

Drives & Controls Exhibition

NEC, Birmingham(B40 1NT)

25/01/2021 - 27/01/2021

The show brings together key suppliers of state-of-the-art equipment representing the multi-tasking culture (more)

Reliable tube connection system for extreme conditions

Reliable tube connection system for extreme conditions

Multi-part steel flare fittings from Stauff consist of fitting bodies, cone adapters with O-rings, support sleeves and union nuts, and are suitable for all common metric outer tube diameters from 6 to 42mm. These flare fittings allow leak-free and pull-out proof connection of tubes with a 37 degree flare in line with DIN 3949, with the threaded fittings with 24 degree cone in line with ISO 8434-1. Part of Stauff’s Connect range, the flare fittings are primarily used in hydraulic systems where previously complicated welding connections had to be used for safety reasons. 

Suitability for a permitted rated pressure up to 500 bar (in the Light Series) and up to 630 bar (in the Heavy Series) allows application even under extreme conditions. As with all connectors from the Stauff Connect range, all components are designed for the rated pressure with a quadruple safety factor: under static stress tests the bursting pressure has to be at least four times higher than the stated pressure value. The elastomer seals on the contact points of the 37in flare fitting permanently increase the sealing effect even under vibrations and pressure fluctuations. The useful life of the components is increased by a high-quality zinc nickel coating which sets new standards in the area of corrosion protection.

Download pdf

Latest news about Hydraulic components

Additional Information
Text styles