Share
Industrial Technology - Linked-in Industrial Technology - Twitter Industrial Technology - News Feed
Latest Issue
Diary and Events

PPMA Show 2021

NEC, Birmingham(B40 1NT)

28/09/2021 - 30/09/2021

PPMA Show 2021 will be the UK’s largest ever event dedicated to state-of-the-art processing and (more)

Southern Manufacturing

Farnborough, Hants(GU14 6TQ)

06/10/2021 - 07/10/2021

Southern Manufacturing and Electronics is the most comprehensive annual industrial exhibition in the (more)

Advanced Engineering 2021

NEC Birmingham(B40 1NT)

03/11/2021 - 04/11/2021

Join us in our 12th and most important edition to date, as we invite engineers and management from all (more)

Stober helps blinds manufacturer take control of automated fabrication process

Stober helps blinds manufacturer take control of automated fabrication process

Drive engineering expert Stober has helped create a new multiple screwing unit that joins profile rails, monitors screw depth and tightening torque for Roma, the international manufacturer of roller shutters, venetian blinds and textile screens.

Working with machine manufacturer Soga Gallenbach, Stober supplied the automation technology that includes planetary gear units, rack and pinion drives and drive controllers for the LeanMotor driven multiple head manufacturing system.

Prior to the design of the new fabrication system, Roma drilled and screwed up to three aluminium or plastic profile rails using an unmonitored screw-fed unit. Frequently, the drill screw created chips between the screw head and the profile rail, meaning that the system had to be reworked manually.

Stober’s Martin Preece explains: “Roma’s brief to the design team was for a system that, as well as eliminating the need for manual intervention and reworking, enabled them to process pre-drilled profile rails in lengths from 710mm to 5.7m. A further requirement was that the new system needed to be sensitive to the torque properties of plastic in the final tightening process. The design was also to be equipped with two drawers for loading the profile rails for processing, either separately or synchronously.”

The new drive solution now feeds the profile rail screws automatically and inserts them pneumatically. It also includes one PE series planetary gear with a belt and ballscrew drive combined with an EZ synchronous servo motor for each drawer, enabling them to move automatically using two Y-axes.

The unit is also equipped with five mounting heads that move independently of each other in the X direction on a gear rack. Each head was equipped with a Z-axis and drilling axis, as well as providing ZV_PE series rack and pinion drives with EZ synchronous servo motors for the X-axis. EZ-motors with ballscrew drive are also used for the Z-axis.

To ensure that the five heads do not collide with each other on the gear rack, Stober engineers implemented threefold collision protection that included controller monitoring of the positions in relation to each other; software limit switches that were parameterised with the permitted travel range for each X-axis; and a mechanical safety switch located on each head. The lightest possible compact motor was installed for the drilling spindle, which allowed rapid positioning for the five axes.

In addition to drilling, countersinking was made possible by the integration of Stober’s encoderless LeanMotor (LM), which is significantly lighter and more compact than an Asynchronous motor. With the same output, it is more cost-efficient and more rugged than a servo drive and uses a single, standard power cable. This made it possible for ROMA to set speed and torque to any point, from standstill to maximum speed, with full torque control.

Each head has three motors located as closely as possible and reach the energy efficiency class IE5 with up to 96 percent efficiency, which gives the added benefits of lower energy consumption and long service life.

Says Martin Preece: “Stober combined the motors with new double-axis controllers from their SI6 series. This highly dynamic solution also makes challenging movements possible, with enhanced safety aspects provided through the integration of STO (Safe Torque Off) and SS1 (Safe Stop 1) safety functions, certified in accordance with EN 13849-1 (PL e, cat. 4).”

The result for Roma is that it now operates with significantly more process reliability and has removed the need for costly reworking.

 

Latest news about Drives and motion control systems

Additional Information
Text styles