Industrial Technology

Flowable silicone offers thermal cycling and shock resistance

Master Bond MasterSil 323 is a two component, addition cured system for bonding, sealing and potting applications. This product has a convenient to use 1:1 mix ratio, and can be packaged in double barrel cartridges for dispensing from a gun applicator.

17th June 2022

Retaining rings cure fastener concerns in medical application

Peristaltic pumps are used to move fluids along a tube in a variety of medical and industrial applications. They can pump sterile or harsh fluids without coming into contact with other components of the pump that can contaminate clean fluids or be damaged by acidic or viscous fluids. And retaining rings are what keeps it all together.

16th June 2022

Modular high-torque gears for heavy loads

Cycloidal gear specialist Nabtesco is expanding its Neco series of gears to include models that are dimensioned for heavy-duty applications.

16th June 2022

Ramco begins production of cold-formed pipe nuts

Ramco says that its investment in new part formers in Ohio will allow it to start producing cold-formed pipe nuts. These will be available with open and closed ends, up to nine inches long and three inches in diameter.

16th June 2022

The best solution for modern building technology

The PTI installation terminal blocks from Phoenix Contact are designed to facilitate the quick and space-saving configuration of building distribution boards.

16th June 2022

Robafoam foam seals benefit the automotive industry

Robafoam has been working with the automotive industry as a foam seal specialist since it was established in the UK as CeraCon UK in 2013, and today around a third of its customers are part of the automotive industry.

16th June 2022

Biocompatible UV curable adhesive formulated for TPU bonding

Master Bond UV17Med is a one part, no mix, UV curable system. It was specially formulated to provide excellent adhesion to many TPUs (thermoplastic polyurethanes), which are widely recognised as challenging substrates for bonding.

15th June 2022

Friction element welding in lightweight automotive manufacture

As a result of the growing use of lightweight metals and various high-performance steels the fastening technology industry faces fresh challenges. According to Arnold Umformtechnik, it is an area in which friction element welding is gaining increasing ground.

15th June 2022

What’s in the cloud for me?

Lots of people asking about the cloud and what is in it for them. Why should they use it, etc? Turck Banner managing director Tony Coghlan explains the fundamentals as they relate to manufacturing sites.

15th June 2022

How do you ensure good adhesion to your part?

One of the most frequent questions Robafoam gets asked when speaking to potential customers is ‘Will the foam stick to our part?’. The short answer is yes, but it may take some other processes before achieving a suitable adhesion.

15th June 2022