The Mini IncOder, a rotary inductive encoder, provides feedback in extremely tough conditions

The IncOder Series rotary encoders can accurately measure full-scale positions between 10 and 100° of motion that can be measured at more than 1,000 points. Fast and simple to set-up, points on the scale can be selected with a simple push-button. Encoder size and resolution is designed to meet application requirements. Celera Motion’s established IncOder™ Series inductive angle encoders are built for precision and durability, and can be custom ATEX rated.

These encoders have been successful in providing precise, automated control for valve diagnostic systems in the oil and gas and petrochemical industries. The valve systems analyse data to provide real-time results on valve health status, without the requirement for operator intervention or process shutdown. The IncOder Series provides required feedback accuracy, combined with continuous operation in demanding conditions.

Custom ATEX rated IncOders have been tested and proven intrinsically safe. This means that the rotary encoder can be used in hazardous, explosive environments without causing a spark or reaching a high temperature that could ignite an explosive atmosphere. Application of the ‘Ex’ mark demonstrates ATEX approval and intrinsically safe operation.

Custom IncOders are rotary encoders and are fully sealed with IP68 rating, providing total protection from dust and water ingress. Operating with a low temperature co-efficient and designed with corrosion-resistant materials, the inductive encoder achieves a high mean time between failure (MTBF) rate. Installed in suitable certified enclosures, the IncOder can be used in tough environments with no impact on accurate, reliable performance.

Experience easy set up – wiring is protected with a flying lead to remove exposed connections. The encoder is rated at 28 V DC and can integrate with a wide variety of third-party motors and actuators. INMOCO’s engineers are well placed to establish application requirements and work with Celera Motion in the development of the customised encoder designs.