Compact, robust signal interfaces offering the greatest possible flexibility are particularly demanded in markets with pronounced miniaturisation. M5 angled panel mount parts from Binder support designers in space-critical applications in automation, robotics, metrology, and controls.
The 3- or 4-pin connectors of the 707 series are equipped with dip solder contacts for PCB mounting, and screw locking ensures reliability of the connection. Mated and locked, the interface complies with protection degree IP68. The particularly space-saving M5 design with screw locking provides an extremely reliable connectivity solution. Within the 707 series, the components are now also available as angled panel mount variants.
The M5 angled panel mount parts are equipped with slightly splayed positioning pins. Hardly visible to the naked eye, these ensure the best possible protection against twisting on the PCB even before the contacts are soldered. Another advantage is the deeper O-ring that seals the interface against the housing. When the panel mount parts are connected, the O-ring is pressed against the housing as far as the stop, thus optimising the sealing effect. Destruction of the seal by overtightening is basically impossible. The M5 angled panel mount parts measure only 7.5 mm in width. This is significantly less than the usual dimensions for connectors, which facilitates use in confined spaces.
Guido Werner, product manager at Binder for a decade, is convinced by the potential of the small circular connector design: “We have already registered numerous attempts by Asian manufacturers to replicate these connectors. However, apart from the benefit of lower costs, our customers realise in practical use that ‘Made in Germany’ still plays in a different league.” Some customers, Werner reports, have had their experience, but have returned and are now convinced not to compromise on quality and reliability – even for a small connector.