Products
Efficient drive solutions for beverage bottling
19/08/22
Automatic bottling and conveyor systems in beverage and liquid food production set high requirements for energy efficiency, operational reliability, wash-down-capability and corrosion protection.
Precision bearings meet the demands of landing gear technology
19/08/22
When we hear the familiar request from the flight deck “Cabin crew…prepare for landing” we know it’s part of the preparation for the arrival of a passenger plane to its destination and one of the critical stages of any flight.
Stepper motors designed for efficiency
19/08/22
Oriental Motor says the characteristics of its AZ series of stepper motors mean automation system developers can reduce expense while increasing efficiency.
Protecting ESP systems in the harshest environments
19/08/22
Most oil producing wells require the use of an artificial lift system. There are various methods of artificial lift which are utilised to increase pressure within the reservoir to push oil to the surface. This allows operators to enhance production and extend well life.
Packers and processors need to adapt to wonky veg
19/08/22
Following this morning’s BBC news report that fruit and veg will be smaller and look different as the summer’s hot and dry weather hits crops, Scorpion Vision is advising processors and packers of fresh produce to consider upgrading to AI-powered vision technology.
Space-saving and powerful connector solutions for e-mobility
18/08/22
Harting is adding Han HPR Compact hoods and housings to the HPR series of connector housings which require special protection against environmental influences in power generation plants, rail vehicles or ships.
Increased energy prices: tips on how to reduce your costs
18/08/22
The cost of electricity, gas and heating oil have risen dramatically worldwide and are placing a considerable burden on plant and machine operators. More than ever, the question arises of how electricity can be saved without major restrictions on daily operation.
COTS motors decrease time and cost for defence projects
18/08/22
Louis Mongin, BLDC product strategy manager, and Antonio Herrera, business development manager at Portescap, explain how commercial off-the-shelf (COTS) miniaturised motors can be quickly converted to use in aerospace and defence projects.
Individually configured drive systems meet specific requirements
18/08/22
With the Nord modular system, Nord Drivesystems offers a wide portfolio of drive components that can be individually combined. The company places particular emphasis on energy efficiency, version reduction and the total cost of ownership.
Enclosure requirements for indoor use with OEM specifications
18/08/22
Chris Lloyd, managing director at Spelsberg UK, offer advice for OEM designers looking to specify an enclosure for indoor applications.
Norelem offers extended range of shaft collars
17/08/22
Norelem has extended its range of shaft collars for use in machine and fixture construction to ensure continuous safety and optimisation in machine and fixture construction.
Polymer composite enhances safety for PCap touch displays
17/08/22
Review Display Systems (RDS) has announced the introduction of a new material technology for use with PCap (projected capacitive) touchscreens from leading touch solutions manufacturer AMT.
Quarter turn enclosure locks now assembled and available online
17/08/22
The FDB Online store now includes a full assembly provision to supplement the standard component offering of quarter turn locks to IP65/67.
Air-operated double diaphragm pump range expanded
17/08/22
The extensive range of Finnish Thompson FTI air-operated double diaphragm pumps (AODD) has recently been expanded with the addition of a new ¼in non-metallic model, available in polypropylene, PVDF and also conductive polypropylene for use in ATEX areas.
Monoblocks from Phoenix Contact offer two connection points
17/08/22
New, so-called monoblocks from Phoenix Contact provide a single pass-through function. With two connection points, they enable the pole-number-accurate and space-saving construction of potential distributions.
General-purpose lidded enclosures are versatile and adaptable
16/08/22
The BM Series of enclosures from British manufacturer BCL Enclosures are a versatile and attractive series of general-purpose enclosures that suit domestic and commercial electrical and electronic installations.
Softing offers extended functionalities with smartLink product family
16/08/22
Two product releases from Softing’s smartLink family offer enhanced functionalities for plant asset management and the implementation of Industry 4.0 connectivity in industrial networks.
Smoother machinery operation with new spring sleeves
16/08/22
German standard components manufacturer Norelem has introduced a new range of spring sleeves for use as indexing and positioning elements.
TÜV-SÜD-certified solution for safe monitoring of cardboard feed
16/08/22
With optical detection on the carton magazine or cardboard feed on carton erectors, a new TÜV SÜD-certified solution from Pilz prevents operator from reaching into the machine through the empty material infeed opening and injuring themselves.
Step-by-step guide to configuring a Maxon ESCON controller
15/08/22
High-precision electric drives manufacturer Maxon UK and Ireland has released a step-by-step guide to configuring the Maxon easy-to-use speed (ESCON) controller.

Login / Sign up