Industrial Technology

Loctite-sponsored teams excel at Formula Student 2022

All four university teams sponsored by Henkel and its industry-leading LOCTITE products finished in top 20 positions at this year’s Formula Student 2022 competition, which took place at Silverstone on 6-10 July.

22nd July 2022

Vehicle collision repair products at-a-glance

The ability to achieve an OEM-standard vehicle repair in the shortest possible time has driven an increasing number of bodyshops to adopt the Henkel Collision Repair System.

15th July 2022

Henkel brings Loctite expertise to Hillhead 2022

At Hillhead 2022, Henkel will emphasise its expertise in engineering adhesives and functional coatings that prevent or rectify problems associated with wear, abrasion, erosion, corrosion and mechanical damage.

6th July 2022

Thread locking ensures plant safety in aggressive environments

Failure of a threaded assembly through self-loosening not only risks lost production but also worker safety, a situation an Australian mining operation faced when M36 anchor bolts threatened the collapse of the jaw crusher equipment frame.

5th July 2022

Selecting the right wave spring end-type

Traditional coil springs are widely used throughout a variety of applications across nearly every industry. The typical end configuration for coil springs is where you have a helix, and the last turn is bent down, touching the second to last turn and ground to form a shim.

4th July 2022

White paper addresses assembly challenges

A new white paper from Henkel focusing on how instant adhesives address today’s assembly challenges has been published – exclusively – by FasteningandBonding.net.

1st July 2022

Technical considerations for the selection of retaining rings

Whatever the fastener requirement, you can find a retaining ring that can meet it. The challenge is to find the right one that will perform according to your specifications and deliver the expected economies. The experts at Rotor Clip offer guidance on the technical considerations for retaining ring selection.

29th June 2022

Webinar addresses correct use of pressure sensitive adhesive tapes

Lohmann has announced a repeat of its webinar on the DVS 3320-2 guideline for permanent pressure-sensitive adhesive applications. The webinar will be held on 13 July at 2:00 pm BST.

29th June 2022

The future of medical wearables by smart bonding solutions

With bonding to skin being particularly challenging, Lohmann is hosting a webinar focusing on bonding solutions for wearables applications on June 29 at 8:45 am.

28th June 2022

Staytite showcases Hardlock nut for rail applications

Staytite exhibited at the Rail Live Exhibition for rail professionals, demonstrating the advantages of the Hardlock nut, specifically its use in safety critical applications.

24th June 2022