Electric actuators offer longer life and up to 100% duty cycle

Electrak LL series high performance electric actuators from Thomson Industries are aimed at applications where long maintenance-free working life and extended duty cycle lifting and moving tasks in challenging environments are prime requisites.

Available with full support from Heason Technology, Thomson’s authorised UK distributor, the Electrak LL combines a high-efficiency brushless motor and drive with low friction ball screw and nut mechanics in a sealed IP66 rated housing that includes onboard control.

An ideal standalone solution for gate and valve control, pick and place, logistics and materials handling and more, the durable actuator’s 24 V supply voltage and high efficiency makes it especially well-matched for mobile machinery applications in construction and agriculture as well as a compelling alternative for pneumatic or hydraulic cylinders on lift and load machinery. With a choice of stroke lengths from 100 to 500 mm, a full load up to 6 kN at 35%duty cycle and 100% duty cycle for task-dependant lower loads, the actuator has a travel life of 600 km.

The Electrak LL series’ control card provides standalone end-to-end position control triggered by separate extend and retract inputs – or the stroke can be set and adjusted by externally located end of stroke limit switches that can be and configured to provide overtravel protection. The controller – which complies to the railway standards EN 50155, EN 60077 and EN 4554 – delivers a constant speed regardless of the actual load and includes controlled braking for repeatable and protected operation for the actuator and its connected equipment. To further ensure safe and reliable use, overload protection includes current monitoring that isolates the supply if exceeded, replicating a mechanical clutch.

The controller further includes temperature monitoring with compensation in addition to voltage monitoring whilst a mechanical holding brake option prevents back-driving for vertical oriented positioning. The long-life ball-screw and nut assembly also features a load-dependant locking capability.

The LL series actuator is supplied in stroke lengths from 100 to 500 mm in increments of 50 mm. Dynamic load rated options of 4 or 6 kN are available with speeds set at 30 or 15 mm/sec respectively. With its 35% duty cycle at full load, the company estimates the actuator to have a 10 to 20% higher duty performance rating than other comparable electric linear actuators. Heason Technology engineers can assist for detailed life versus load calculations where up to 100% duty cycle is possible.

Wide application flexibility is ensured with a comprehensive choice of front and rear mechanical interfacing options that include stainless steel pin, forked and threaded adapters. The Electrak LL is robust and durable with a corrosion protected aluminium and polycarbonate housing which is washdown-compatible and includes UV-resistant surface treatment.

Heason Technology Ltd

Motion Solutions Centre
Spring Copse Business Park
RH13 0SZ

+44 (0)1403 792300



More products
Farnell, NXP and Doulos present new Industry 4.0 webinar
Farnell has announced the launch a new global webinar covering ‘Automation and Edge AI for Industry 4.0’ in partnership with the Element14 Community, NXP and Doulos on Wednesday 24 August.
Needle valves receive ISO 15848-1 Class C low emissions certification
Parker Hannifin is unveiling a series of valves tested to ISO 15848-1 Class C, a standard that sets out the measurement, test and qualification procedures for fugitive emissions from industrial valves.
Thorite offers same-day hydraulic hose assembly service
Air and fluid power specialist Thorite has launched a same-day hydraulic hose assembly service to help customers reduce downtime and control costs.
Festo demonstrates bioreactor for large-scale photosynthesis of algae
Festo presented the PhotoBionicCell research project at the Hannover Fair – a bioreactor that enables the efficient and large-scale photosynthesis of algae.
Actuator increases accuracy and productivity of bagging machine
When end users of a precision bagging machine started using economical bags with inconsistent sizes, this impacted accuracy and productivity of the bulk bagging process.
World’s first e-chain made of 100% recycled material
Conserving resources and extending the product life cycle are the objectives of the new Igus cradle-chain E2.1.CG, which the company says saves 28% CO2 versus current e-chain production.
Siemens Congleton factory accelerates towards net zero goal
Siemens’ Congleton factory is on track to achieve carbon neutrality this year – eight years ahead of its original target.
Full speed ahead for a custom conversion
A vision for a customised camper van led Leigh McCarron to Minitec UK. Working together to Leigh realise his dream, Minitec advised on the choice of profile that would turn an old transporter vehicle into a customised ‘king of the road’ camper van.
Inductive sensors prove a ‘jack of all trades’ in bridge construction
When a specialist assembler of prefabricated bridges needed a rugged sensor for position sensing on its hydraulic cylinders, it turned to Contrinex.
Digital tools to support engineering design
Nowadays in engineering, digital tools are an essential part of a design engineer’s daily life and any tools that are available freely are naturally an added bonus.

Login / Sign up