Intertronics supports 3D printed bioelectronics research

When the Department of Automatic Control and Systems Engineering (ACSE) at The University of Sheffield was looking for a way to accurately 3D print bioelectronic sensors, it reached out to Intertronics for support.

The company supplied mixing and dispensing equipment to improve the consistency and quality of the mix, achieve better printing definition, and reduce blockages in the nozzle of the 3D printer.

To improve the way recovery from injury and the progression of neurological/musculoskeletal conditions are monitored, the ACSE team is developing a diagnostic glove that includes several flexible bioelectronic sensors. The sensors are formed from elastomers mixed with various conductive nano or micro particle compounds, like graphite, platinum, and silver, which are 3D printed onto the glove’s material.

To dispense tiny amounts of material, the ACSE team uses an extrusion-based 3D printer. However, during dispensing, particle aggregates were forming and particle distribution was being altered, causing material to clog in the nozzle. The ACSE team contacted Intertronics, who recommended Preci-Tip Precision Dispensing Tips. Their design has a streamlined conical fluid path that delivers smoother, higher fluid flow rates and lower dispense back pressure compared with most standard dispensing tips, resulting in improved accuracy and much reduced clogging. Their industry standard Luer Lock fitting meant they were compatible with the University’s existing equipment.

“The customer reported that the Preci-Tips worked well on their highly viscous silicones, they offered good flow, good fluid break off, and stopped agglomerations,” said Paul Whitehead, strategic accounts manager at Intertronics. “The results were better definition and a more reliable system, without blockages during the 3D printing process. However, further discussion revealed that they had challenges with the mixing of the filled polydimethylsiloxane (PDMS) mixtures.”

The process involved mixing nanoparticles into the very viscous PDMS to produce a graphite composite. The ACSE team were adding an organic solvent to reduce the viscosity of the mixture and therefore aid mixing. The solvent had to be removed post printing, and this required testing to confirm there was no remaining contaminating solvent. There were health and safety considerations for the team in using this approach.

Intertronics then suggested the team consider trialling a THINKY Mixer to achieve better mixing success. These industrial non-contact planetary centrifugal mixing machines use both rotation and revolution of material in a container under an acceleration of 400 G to achieve consistent mixing results. In a THINKY Mixer, even materials of very high viscosity, such as those used by the ACSE, can be mixed in a matter of minutes. The THINKY Mixer enables the team to document the exact time and speed of the mixing, which makes the process parameters trackable.

“The THINKY Mixer is a huge improvement on our previous process and means we can achieve consistent outcomes more quickly,” said Tom Paterson, postdoctoral research associate at The University of Sheffield. “We’ve removed the need for solvents, which removes a step from the process, improves health and safety, and removes the regulatory requirement to prove this compound has been removed. The mix quality is extremely good, the mixer doesn’t introduce air into the mix, and we’re making a substantial time saving.”

Flexible wearable electronics have a great deal of potential for future applications and the ACSE team is currently working with clinicians on translational projects in human health monitoring.

Intertronics

Station Field Industrial Estate
Banbury Road
Kidlington
OX5 1JD
UNITED KINGDOM

+44 (0)1865 842842

info@intertronics.co.uk

www.intertronics.co.uk

More news
NSK bearings help pet food plant raise OEE
When a major UK pet food producer wanted better machine utilisation with the aim of raising its OEE (overall equipment effectiveness) by 3 points, it asked experts at bearing specialist NSK if they could evaluate processes and systems to help with this improvement goal.
NORD DRIVESYSTEMS has “inspiring discussions” at SPS
Drive specialist NORD DRIVESYSTEMS reports a highly success time at the SPS trade fair in Nuremberg, with three intensive days on the topic of efficient drive solutions for the automation industry.
A Christmas gift with every GS Yuasa battery
GS Yuasa has unwrapped its latest promotion – a Christmas present with every battery. Whether you’re buying a battery for a Pyronix alarm system or a Peugeot – qualifying purchases of both GS and Yuasa batteries throughout December will include a festive freebie.
Beckhoff UK and HepcoMotion’s mechatronics showcase takes centre stage
Automation technology specialist Beckhoff UK, in collaboration with leading manufacturer of linear motion systems, HepcoMotion, hosted a mechatronics showcase at MK7, the home of Oracle Red Bull Racing in Milton Keynes, with several innovations from both companies on display, as well as a brand-new product reveal – the GFX-r guidance system.
PPMA re-brand puts automation at the heart of UK manufacturing
The PPMA Group of Associations has re-branded and has changed its name to AutomateUK to better represent the needs of its membership and their end user customers in the ever-changing manufacturing landscape.
steute Technologies restructures its business fields
steute Technologies, an international technology company offering switches, intelligent sensors and wireless systems, has announced a comprehensive restructuring of its business fields.
Young designers take off with e-racing cars and support from norelem
Set around the challenge to build and operate a purely electric racing car, this year’s Formula Student (Electric) competition put student designers to the test. To prepare several teams for the event, the VDI Racing Camp powered by norelem brought together more than 250 participants from across Germany, preparing them for the prestigious competition by providing components and support to each team.
Showcasing design, production and process engineering in the food and drink sect
Taking place on 1 May 2024 at the National Motorcycle Museum, Food Manufacturing Live serves the design, production, process and maintenance engineering teams across the UK food and drink manufacturing sector.
Understanding safety and security for the protection of human and machine
How do you master employee protection, liability protection, productivity and data protection? How do you increase your quality and simultaneously prevent manipulation on your machines? How do you protect your data and employees in equal measure? Pilz is hosting a free webinar on 15 December, 9:30-10:30 am, to address just these questions.
Schaffner opens new regional channels for its range of EMC solutions
EMC solutions provider, Schaffner, announces new partnerships with three distributors to further broaden the reach and scope of its product range and support services across Europe. The new agreements with Telerex, CATS and DSL Components will open new supplier corridors and enable customers to have local and faster access to products.

Login / Sign up