New research reveals four key actions to strengthen process resilience

Independent research commissioned by RS Components has uncovered four key actions that senior engineers should consider taking to build process resilience across their organisations.

The findings are presented in the second report in The Resilience Index series - The Resilience Index: Process - How a focus on process can build better resilience and drive productivity. If taken, these actions will help protect companies, push them to think and act differently, and establish a culture of continuous improvement, which will be the foundation for future process improvements, stability, and transformation. The four actions are:

Continue to innovate. The UK is ranked third in the world and first in Europe for innovation (measured by patent registration 2000-2015). With a strong research and development heritage, it is vital UK manufacturers continue to invest in process improvements across all areas of their operation.

Senior engineers should seek to build a network of peers and partners (such as RS Components) to help understand the opportunities and challenges offered by emerging technologies. 

Keeping an open mind to new ways to solve problems is key. While tried and tested methods can be the best, in many cases new technologies can support solving the problems in a cheaper or faster way.

Looking to invest in small scale, reversible pilots to understand the benefits of emerging technology, without the risk of being at the bleeding edge of innovation, is also a practical option to boost process resilience through innovation.

Build capacity back-up. Many companies still need to improve the reliability and robustness of their processes by building in redundancy support so systems can withstand unpredictable and unplanned failures. There must be prioritisation of the duplication of critical components or functions of a system to increase reliability. However, being efficient is still important, as carrying too much overhead will also impair resilience.

Redundancy planning must be risk based. Analyse processes and risk assess what could cause issues and the financial impact of them occurring. Then insure against them through building process redundancy, investing, improving asset reliability, contingency planning, and building partnerships.

Think differently about outsourcing. Outsourcing strategies need to focus on the benefits that can be gained alongside potential cost savings. For example, outsourcing can increase quality and innovation or make processes more efficient, for instance, by outsourcing control of the site’s inventory to experts. Strategies should carefully consider if outsourcing decisions free-up enough internal capacity to help the organisation concentrate on core competencies or allow for quicker adaptations or transformations. The default position of taking processes in-house to drive cost efficiencies needs to be continually challenged, and the holistic benefits of a strategic outsourcing approach closely scrutinised.

When reviewing processes ask deep questions about why and the benefit of doing it in-house. Could there be great advantages from outsourcing?

Continuously improve. Invest in a commitment to build and embed a continuous improvement culture, and the relentless identification and eradication of losses or inefficiencies. Crucially, acknowledge that small, iterative changes over the long-term will have a compound effect on processes. As an ongoing obligation, it requires active leadership from the top to empower bottom-up improvement.

Examine basic processes and aim to incrementally enhance efficiencies and effectiveness. This can be applied to single or multiple processes within the organisation, including procurement strategies; stock holding; energy conversion and consumption; proactive maintenance regimes across the plant, or even workforce patterns. Taking small improvement steps can make a big difference over the long-term – but it requires a proactive, can-do attitude with total company buy-in.

Learn more about the different continuous improvement techniques, such as Lean and Six Sigma and develop a strategy to build a continuous improvement mindset in operations.

Richard Jeffers, director of maintenance solutions at RS Components, comments: “It is estimated that transforming manufacturing resilience in the UK could add £26bn of productivity value to the economy, and it’s clear, that strengthening process resilience has an important role to play in achieving this.

“The report shows how senior engineers should view improving process resilience not as a start stop programme, but one that builds a culture of continuous improvement. Establishing this will underpin all areas, drive forward innovation and help businesses to begin to think differently about how to address and implement process change and progress.

“At RS Components, we aim to support senior engineers seeking to improve their company’s resilience through a culture of continuous improvement with a suite of customised services and solutions. Acknowledging that our customers will be at different stages on their continuous improvement journey, we offer bespoke services and support to suit individual needs, so, no matter what stage they are at, engineers within any industry can strengthen their process resilience and reap the rewards that brings.” 

For a copy of The Resilience Index: Process report, visit: https://www.rs-connectedthinking.com/en/operational-efficiency/insight/the-resilience-index-process

RS Components Ltd

Birchington Road
Corby
NN17 9RS
UNITED KINGDOM

01865 207546

uk.marketing@rswww.com

www.rs-online.com

More news
Robust inductives stop high-speed spindles ‘getting in a spin’
To maximise their efficiency and productivity, high-speed machining centres often include automated tool changers. When a drive-motor manufacturer needed a reliable and robust sensor to detect the position of a machine’s main spindle before initiating the tool-change sequence, it turned to Contrinex.
PI increases production space at HQ by 11,000 sq ft
Rising global demand for semiconductor chips requires investments in equipment that is needed for chip production. To meet these needs, ultra-precision motion control, nanopositioning, and precision automation equipment Physik Instrumente (PI) has increased its production space.
Farnell, NXP and Doulos present new Industry 4.0 webinar
Farnell has announced the launch a new global webinar covering ‘Automation and Edge AI for Industry 4.0’ in partnership with the Element14 Community, NXP and Doulos on Wednesday 24 August.
Needle valves receive ISO 15848-1 Class C low emissions certification
Parker Hannifin is unveiling a series of valves tested to ISO 15848-1 Class C, a standard that sets out the measurement, test and qualification procedures for fugitive emissions from industrial valves.
Thorite offers same-day hydraulic hose assembly service
Air and fluid power specialist Thorite has launched a same-day hydraulic hose assembly service to help customers reduce downtime and control costs.
Festo demonstrates bioreactor for large-scale photosynthesis of algae
Festo presented the PhotoBionicCell research project at the Hannover Fair – a bioreactor that enables the efficient and large-scale photosynthesis of algae.
Actuator increases accuracy and productivity of bagging machine
When end users of a precision bagging machine started using economical bags with inconsistent sizes, this impacted accuracy and productivity of the bulk bagging process.
World’s first e-chain made of 100% recycled material
Conserving resources and extending the product life cycle are the objectives of the new Igus cradle-chain E2.1.CG, which the company says saves 28% CO2 versus current e-chain production.
Siemens Congleton factory accelerates towards net zero goal
Siemens’ Congleton factory is on track to achieve carbon neutrality this year – eight years ahead of its original target.
Full speed ahead for a custom conversion
A vision for a customised camper van led Leigh McCarron to Minitec UK. Working together to Leigh realise his dream, Minitec advised on the choice of profile that would turn an old transporter vehicle into a customised ‘king of the road’ camper van.

Login / Sign up