Caliper brakes for safety critical applications
Specialist brake manufacturer INTORQ offers energise-to-release caliper brakes for safety critical applications with large masses or falling loads. Effectively these caliper designs are developed from disc brakes and their kidney shape allows the creation of compact assemblies with disc diameters from 150 to 850mm. Interruption of the dc supply voltage results in full clamping force being applied to the brake disc. Depending on dimensions and the number of calipers, the brake torque can be from 100 to 10000Nm.
The main caliper brake model, the BFK466, is robustly constructed for safety critical applications. Multiple helical springs apply force to a floating armature plate which clamps onto a rotating brake disc, normally part of the machine construction. High stability friction material between the brake and the rotating disc increases the resulting torque. To release the brake a DC voltage is applied to typically four electromagnetic coils inside the brake which pull back the armature plate to a released position leaving no residual torque. INTORQ 'cold brake' technology applies over-excitation of the coils for the fast release and then a lower holding current. This reduces energy consumption, the heat generated and also speeds the brake re-engagement when the DC supply is interrupted.
As well as the reliable design concept of multiple springs and coils, INTORQ gives high priority to long service life and safety. B10d lifetime data is available to allow evaluations of the performance level of machine braking systems; for the BFK466 it is 12 million hours. The concept of a "redundant caliper" is normally used in safety critical applications so that if one caliper fails there is another available to stop the load.
INTORQ spring applied caliper brakes are available from Techdrives in the UK. The BFK463, a new model, suits smaller drives with typical braking torques of 100Nm. There is an intermediate model BFK456 and the larger BFK466 which can deliver around 1500Nm per caliper. These brakes are aimed at lifts and hoists, particularly where the motor is a direct drive without gearbox. They also suit general braking duties for high loads, for example where safety integrity requires braking at the low speed output rather than through a gearbox.
Other News from Lenze Ltd
Latest news about Brakes