Hydraulics will run and run with proper servicing
Over the last 30 years, the performance, sophistication and operational demands of hydraulic equipment have increased significantly. So planned maintenance and servicing are vital for maximising working life and minimising costs. David Atkinson of Oilgear runs through the basics of looking after a hydraulic system.
Modern cars are fantastically reliable, but only if they are well serviced and maintained. Similarly, well designed and built hydraulic machines will run for many years, but only if servicing extends beyond the occasional fluid level check. Servicing can be reactive or proactive, but either way it needs to be of a high quality to ensure optimised performance. In fact it is a simple truism that hydraulic system failures are very often down to lack of maintenance – the main cause being lack of fluid cleanliness. Thus the first key to hydraulic performance is maintaining the fluid.
Regular (often monthly) checks should be made of copper, silicon and water content, the ISO particulate count, viscosity, additives and oxidation concentration. Minute amounts of metal debris, or dirt ingress, can, over time, damage seats, seals, pistons, bearings and other components. At the time same checks should be made for excessive heat and vibration – simple but effective indicators of system health.
Some hydraulic users undertake these checks themselves, but it is often better to have a hydraulic specialist visit site, as they have considerable expertise and experience and their advice will be invaluable. An effective, proactive maintenance program requires time, effort and some expense to implement. However, it is cost-effective, with the investment quickly recovered through savings as a result of improved machine performance, increased component life, longer fluid life, reduced downtime and fewer repairs. Well made hydraulic components have a long life expectancy (which in some cases can be measured in decades) and first-rate hydraulic companies offer full lifecycle support for their products. For example, there are Oilgear pumps that have been running for over 50 years, while axial piston assemblies tested in-house to 100,000 hours running can show zero wear.
Related to servicing, premium hydraulics manufacturers will also offer a repair service for parts that have been damaged. This will include disassembly, inspection, quotation, refurbishment with approved parts, and complete testing. Ultimately there will be a ‘good as new’ guarantee.
If and when a failure happens, users need support to quickly arrange repairs or fit replacement parts. A good hydraulics company will carry an extensive inventory of spares for equipment dating back over 20 years or more, so should be able to supply a replacement part (and expertise) promptly.
Larger items are often returned to their manufacturer for repair or refurbishment, where they will be stripped down, inspected and an assessment report prepared. From this a full technical quotation for remedial work can be provided and if an item is beyond economical repair, the company should be able to manufacture an ‘as new’ part. When it comes to breakdowns, Oilgear will work around the clock if required – combining a manufacturing department’s quality with a service department’s response. Repaired or replacement parts are assembled and fully tested in-house and may be delivered to site by Oilgear commissioning engineers in a vehicle fully equipped with state-of-the-art flow and pressure monitoring equipment and accumulator charging equipment so that re-installation can be carried out quickly and efficiently.
Hydraulics service providers understand that site requirements may change over time, often driven by environmental requirements and legislation, and should work with users to meet these. For instance press operators increasingly want to develop energy efficient ‘power on demand’ capabilities, while other users are looking for water based solutions to reduce fire risks.
Oilgear has developed on-demand systems using inverters, softstarts and other complementary technologies and has recently added a new multi-fluid test rig to its suite of testing stations, so can simulate virtually any working system.
A hydraulic system’s longevity can depend on good installation and commissioning by experienced engineers. Oilgear can provide such staff, or alternatively run training courses, which can be tailored to suit the individual user’s requirements.
In conclusion, modern hydraulic systems are expected to have long, productive working lives and this can be achieved by using high quality components and a strong co-operative relationship with the manufacturer. By working closely together, it is possible to deliver a proactive maintenance routine with the necessary technical expertise to minimise any downtime, thereby improving productivity.”
Other News from Oilgear Towler Ltd

Latest news about Hydraulic components
- Helping OEMs bring new machine features to market
- Eaton launches a new Multiplate system enabling faster and simpler connectivity for Flat Face Series Quick Disconnect Couplings
- Moog Modular Electrohydrostatic Actuation System (EAS) combines the best of two worlds
- Particle contamination monitor performs test procedure in under 90 seconds
- Bonomi UK launches new website and digital catalogue
- Eaton’s new CMT mobile valve section increases design flexibility
- Very high speed solenoid valves increase semiconductor production output
- Engineering Expertise from Eaton Hydraulics UK keeps the blades turning
- Dispense pumps meet the growing fluidic challenges of evolving medical-IVD instruments
- Elesa launches new FH modular coolant hose system
- Air bleed orifice improves efficiencies in hydraulic systems
- Essentra Components produces free guide to hydraulic hose protection
- Hycrocam hydraulic bolt tensioners remove uncertainty from couplings
- Bürkert solenoid valve tackles dezincification and water hammer
- Thermoplastic hydraulic hoses and fittings designed to work together, enabling safe and effective fluid conveyance
- 5 facts about hydraulics that may surprise you
- Money saving fallacy of hose re-ending
- Miniature solenoid valve offers high flow and low leakage
- Moog and Voith to form strategic partnership
- Charting the right course to efficiency in the marine industry
- Greater flexibility for high pressure applications
- Hydraulic handbook is packed with useful data
- Filtermist to demonstrate how it helps workers ‘Go Home Healthy’
- Elesa level monitoring accessories and labelling provision simplify hydraulic systems
- VHS appointed Bosch Rexroth integrator
- Absorbing water from hydroscopic oils
- Eaton Hydraulics invests in state-of-the-art training facility
- Solenoid valve key to brake innovation
- Stauff demonstrates innovations in hydraulic components and accessories at Fluid Power & Systems 2018
- Hose selection is critical to minimising fire risk
- Latching solenoid valve saves energy
- VHS Hydraulic Components acquires Nielson Hydraulics
- Hose combines high pressure with long cycle life
- Plugs are designed to seal cross port passageways
- Lee Products publishes 9th edition of EFS handbook
- A match made in heaven
- Bosch Rexroth Hydraulics Roadshow is hailed a huge success
- New ATEX hydraulic accessories from Elesa
- Elesa breather caps and level indicators hit the mark for Sarum Hydraulics
- Best practice is vital in hydraulic fluid selection
- In-line wash flow safety screens take filtration to a higher level
- How to control hydraulic flow rates more efficiently
- Staying safe with hydraulic hoses
- Bespoke test rig installation completed
- Lee restrictors keep the electricity on
- Miniature inert solenoid pumps offer flexibility
- Gas charging test kit product range
- The risks of outdated separators
- Controllers for precision hydraulic motion
- The importance of security in today’s connected world
- Manufacturer keeps UK hydraulics industry alive in Singapore
- Tom Parker introduces the FasTest range
- Pressure Hydraulics Cork recognised as Ireland’s first Bosch Rexroth Authorised Training Centre
- Liquid cooling for enclosures
- Slots versus holes improve flow through safety screens
- Ultra-compact, energy-efficient solenoid valves save space and reduce weight
- Brammer announces new partnership
- Hydraulic Components catalogue
- Hydraulic hose assembly
- Reliable tube connection system for extreme conditions
- The show goes on for RSC thanks to hydraulic cylinders
- Trio of success caps off growth year for hydraulics specialist
- Top ten tips – oil analysis
- Vestas choose Bosch Rexroth for hydraulic power unit
- Connectors: clean break, flat face or double shut off?
- Report highlights maintenance failings in UK manufacturing
- The hydraulic fluid 'laboratory in a suitcase'
- Ultra-miniature solenoid valves save space and use less energy
- Robust, lightweight PEEK safety screens
- Strainers provide coarse level filtration without pressure drop
- Big savings in oil filtration for aerospace
- Investment to meet growing demand
- Failure to conduct oil checks a "major cause" of hydraulic failure
- New connector for sterile processes
- Miniature inert solenoid valve protects sensitive fluids
- Miniature, chemically inert stepper dispense pump
- Strainers provide coarse level filtration without pressure drop
- Liquid cooling for enclosures
- Solenoid valves - there's one for every occasion
- Industry 4.0 - concepts and practical solutions
- Miniature medical grade check valve ideal for plastic manifolds
- BFPA and BCAS form UK Motion Control Alliance
- A 'hands-on' opportunity in Telford
- Miniature servo actuators bring high power density to Formula 1
- Stauff UK and GR Motosport unveil Connect Academy
- High pressure flow restrictors for critical applications
- Moog delivers tyre coupled simulation system to Mazda
- Neilson Hydraulics goes back to new with Bosch Rexroth
- Piedrafita selects Moog for fatigue test system
- Bosch Rexroth launches oil analysis service to reduce machine downtime
- Oil contamination identified as a major cause of machinery failure
- Miniature burst plugs provide over-pressure protection
- New gear pump design offers near silent forklift operation
- Eaton's low-temperature hydraulic hose serves mining and construction
- Hydraulics
- Bosch Rexroth opens new service and training centre in Wakefield
- Accurate positioning and adjustment of equipment
- Tom Parker brings new range to the UK market
- Precision microhydraulic components solve critical problems of size and weight
- Miniature electro-fluidic systems from Lee Products
- Bosch Rexroth gives legs to walking robot
- A short guide to selecting quick release fluid connectors
- Bosch Rexroth expands into filtration market
- Electro fluid systems guide
- New EFS handbook published by Lee Products
- UK sales and service partner for Sauer Danfoss
- NACE compliant safety screens for extreme applications
- Ultra-fine safety screens are robust
- Fluid Control
- Safe fluid power
- Bright future ahead as Bosch Rexroth breaks ground in Wakefield
- Configure hydraulic solutions
- Inert solenoid pump sets new standards of design flexibility
- Gas springs operate in conjunction with electro-hydraulic lifting system
- The business benefits of upgrading hydraulic systems
- Equipment for use in hazardous areas
- The essential companion throughout hydraulics and pneumatics industries
- Hydraulics for subsea operations
- Bosch Rexroth completes Hägglunds Acquisition
- Safety holds the key to improved business performance
- Compact piston type open circuit pumps
- Hydraulics distribution
- Independent, highly dynamic linear axis
- Multiple pumps with reduced overall length
- Eaton's hydraulics help free the Chilean miners
- Dampers key in support vessel safety system
- Fluid connectors
- Keeping your fluids clean
- Atomising nozzles deliver precise spray pattern
- Parker plays crucial role in military projects
- Hydroscopic breathers boost performance
- New hydraulic power packs
- Going with the flow on green energy
- Oil level indicators in brass and stainless steel
- Replacement filters enhance profitability
- Edbro success in tilt test trials
- Parker distributor BSP Hydraulics expands into marine sector
- Fluid control catalogue highlights Burkert's wide range
- Micro nozzles for delicate washdown applications
- Compact, light valve for high pressure charging
- Hydraulics and electronics combine in stored energy management system
- New handbook for hydraulic and pneumatic components
- An engineering guide to miniature fluid control components
- Connector approved to key hydraulic standard
- Couplings for medical applications
- BFPA hosts major standards meeting
- Microfluidics
- Miniature orifice saves weight and space
- Hydraulic Fluids
- High speed solenoid valves for micro dispensing
- Highly accurate screened orifice for medical applications
- Leak-free plugs handle high pressures
- Lightweight valves ideal for OEM flow switching
- Miniature solenoid valve sets new standards
- High pressure cartridge screens block rogue contaminants
- Micro inert valve needs less space and uses less power
- Micro-dispense nozzles for optimum system flexibility
- Miniature check valve for harsh duty applications
- Miniature insert orifice saves weight and space
- Miniature pumps help make a smaller machine, better
- Miniature relief valve ensures zero leakage
- Miniature shuttle valve ideal for hydraulic isolation
- Power generation Chek valves are field serviceable
- VHS solenoid valve manifold ideal for flow injection tasks
- Zero leak check valves suit critical flow control systems
- Control two circuits from just one hydraulic source
- End caps protect and isolate
- Rugged safety screens handle twice the pressure
- Cleaner, faster, smarter, safer drum connections
- Innovative connectors simplify seal test line construction
- Steel cam couplings offer quick release
- Cylinders designed to boost productivity
- New 90 litre bi-directional poppet valves
- Logic element combines flexibility with performance
- New premises for Hydrastore marks expansion
- When is a repair not a real repair
- Reducing the hazards of analysis
- Hydraulic power for innovative milking systems
- Parker brings particle analysis out of the lab
- Pump design offers big benefits in stationary hydraulic applications
- Helping to minimise environmental damage
- Hydraulics performs in the leisure industry
- That sinking feeling - with complete digital accuracy
- Two-stage breather cap
- High performance filters
- How to capitalise from your component breakdowns
- Bosch Rexroth lands its biggest ever order
- Parker Hannifin launches its cylinder repair service
- Taking sides on suction and return filtration
- Hydraulic rams and block cylinders
- Needle type flow control valves
- Absolutely leak-free larger couplings
- High pressure plug for venting applications
- Compact valve protects in the event of sudden failure
- Leak-free connections speed endoscope reprocessing
- Bosch Rexroth takes electrohydraulics to the next level
- Valves meet needs for higher flow rates
- The smallest solenoid valve in the world
- Couplings make fluid transfer simple and safe
- Proportional flow control valve
- Hydraulics power two Iraqi bascule bridges
- Multi-function screw-in valve