PMBus communications for modular power supply

TDK Corporation announces the introduction of a standby/signal option with a PMBus communications interface for the QM series of 700 to 1500W modular AC-DC power supplies. The PMBus (Power Management Bus) is an open standard digital power management protocol, allowing communication between devices.

The QM series is the latest product in a 37-year legacy of modular power supplies, featuring very low audible noise and full MOPPs medical isolation. The new PMBus interface can be used to improve system-level power management. It allows the user to inhibit or enable all the QM output voltages with a single command, monitor the inlet temperature, review fan speed and status, monitor run-time and determine manufacturing related data.

Other News from TDK-Lambda UK

• 15W and 20W DC-DC converters have 5,000V AC isolation and a wide 4:1 input range
• Cost effective 5 to 25W board mount Class II power supplies have wide operating temperature ranges
• 5V to 28V, 12.5A rated output models added to wide range input buck-boost DC-DC converter series
• TDK-Lambda announces £11.5m investment to redevelop its manufacturing facility in Ilfracombe, UK
• TDK-Lambda announces has two promotions and adds one new member to its Board
• TDK launches medical wall mount power supplies
• Class II 36W medical external power supplies are EU CoC Tier 2 compliant
• UK power supply manufacturer steps up to coronavirus challenge
• 1kW programmable DC power supplies available in 1U high full or half rack sizes
• TDK-Lambda acquires Nextys
• 3-phase power supply delivers 3200W at 48V
• 1200-1500W modular power supply has lowest noise
• New modular power supply
• High efficiency 250W medical power supply
• Digital power conversion
• Power supplies
• The power and the glory
• Custom power supplies
• Medical power supplies range extended with new voltage options
• The power and the glory
• Efficiency versus EMC: a trade-off eliminated
• Power supplies
• Specifying the right power supply

Latest news about Power supplies

• 15W and 20W DC-DC converters have 5,000V AC isolation and a wide 4:1 input range
• Ultra-wide input DC-DC modules for rail
• DC/AC inverter for the DIN rail
• Cost effective 5 to 25W board mount Class II power supplies have wide operating temperature ranges
• 5V to 28V, 12.5A rated output models added to wide range input buck-boost DC-DC converter series
• Connect with the PRO 2 – Wago’s all-new power supply unit
• TDK-Lambda announces £11.5m investment to redevelop its manufacturing facility in Ilfracombe, UK
• TDK-Lambda announces has two promotions and adds one new member to its Board
• TDK launches medical wall mount power supplies
• Innovative no compromise basic DIN-Rail power supplies offer cost advantages
• Relec Electronics announces the CQB75W8 and CHB150W8 series from Cincon
• Class II 36W medical external power supplies are EU CoC Tier 2 compliant
• Relec Electronics adds Cotek Systems’ SR-1600-Plus inverter series
• Age is no barrier to excellence
• Perfecting power
• Power up-time
• 3-phase power supply delivers 3200W at 48V
• 1200-1500W modular power supply has lowest noise
• New modular power supply
• Configurable power supply for highest system availability
• High efficiency 250W medical power supply
• PULS Launches cost-efficient DIN-rail power supply family
• Install your power supply right next to the load
• Power supply unit with maximum efficiency
• Why is energy being needlessly wasted while prices spiral out of control?
• Digital power conversion
• Single phase power supply with 960W of output power
• Don't take your power supplies for granted
• Power supplies
• The power and the glory
• Medical power supplies range extended with new voltage options
• REO is on track with massive order
• The power and the glory