Industrial Technology - Linked-in Industrial Technology - Twitter Industrial Technology - News Feed
Latest Issue
Diary and Events

PPMA Show 2021

NEC, Birmingham(B40 1NT)

28/09/2021 - 30/09/2021

PPMA Show 2021 will be the UK’s largest ever event dedicated to state-of-the-art processing and (more)

Southern Manufacturing

Farnborough, Hants(GU14 6TQ)

06/10/2021 - 07/10/2021

Southern Manufacturing and Electronics is the most comprehensive annual industrial exhibition in the (more)

Advanced Engineering 2021

NEC Birmingham(B40 1NT)

03/11/2021 - 04/11/2021

Join us in our 12th and most important edition to date, as we invite engineers and management from all (more)

Self-lubricating bearings for linear motion systems

Self-lubricating bearings for linear motion systems

Motion system designers are increasingly outfitting round and profile rails with self-lubricating bearings that can significantly reduce cost of ownership, improve performance and deliver virtually maintenance-free operation. However, whether they will deliver their fullest potential depends on how the bearings have been specified, installed and evaluated for compatibility with their intended environment.

For more than 10 years, self-lubricating – or lube-for-life – designs have used oil-saturated polymers in linear bearing applications ranging from food processing to automotive assembly. OEMs are turning to these designs to make their machines more attractive and take advantage of their maintenance-free operation with longer life, increased reliability and overall lower cost of ownership.

MRO teams will accrue benefits, as their job is to keep installed bearings operational and replace them at the end of their lifecycles. They will enjoy significantly longer maintenance and replacement intervals, greater machine uptime, higher throughput and cleaner operation. They will also save money by eliminating the need for expensive lubrication systems and lubricants.

Self-lubricating bearings commonly used in linear and profile rails are made of oil-impregnated plastic. A typical design might include a self-lubricating cartridge pressed onto each end of a pillow-block housing of a round rail. In such a design, the micro-porous polymer section is saturated with oil, which gets diffused when the carriage is in motion thanks to the capillary action of a wire spring that is in continuous contact with the rail. This capillary action ensures that there is always a film of lubricant between all rolling elements and races.

When motion stops, the micro-porous polymer acts as a sponge to reabsorb the oil, preventing excessive build-up of the lubricant on the shaft and eliminating the messy dripping that comes with manual oil applications. A double-lip, nitrile seal provides further protection from oil loss.

Whether you are an OEM motion designer seeking to design a maintenance-friendly system or a maintenance engineer replacing a bearing that requires manual lubrication, the design and application factors you must consider are similar. Maintainability adds a critical dimension to the specification matrix, impacting – or being impacted by – almost every variable. Self-lubrication options should be considered for just about every profile or linear guide specification and evaluated based on the following criteria:

Availability of maintenance support: Where end-user maintenance resources are limited, lubrication-free bearings are an easy choice. Independent testing commissioned by Thomson Industries showed that self-lubricating bearings exhibited no need for maintenance or addition of lubrication to the lube block during a three-million-cycle deflection test.

Lifecycle: The possibility of consistent performance and maintenance-free opera-tion can extend the life of the bearing by as much as three times when compared to a bearing that is lubricated just once – and not subsequently – during installation.

Accessibility: One of the key factors in determining whether to specify a self-lubricating bearing is the location of the bearing on the equipment. The more disassembly and reassembly required to access the bearing for lubrication, the more time and money will be saved by eliminating the need to maintain that bearing.  

Temperature: Vendors will rate their bearings for operation in certain ranges. Operation outside those ranges could result in bearing failure. Some lubricants, for example, will dry up if operation temperature is too high. A second temperature-related factor is that self-lubricating bearings tend to run faster and thus hotter because there is better control over lubricant build-up, which minimises dripping. This is not a huge issue but should be considered if the expected operating environment will have temperatures close to what the vendor recommendations.

Extension: The addition of lubrication bushings to the pillow block can add length to the system, since they are often added on both ends of a carriage. It is seldom much more than a few millimetres, but in tight quarters or where extension flexibility is limited, it could be important. A precise analysis of space requirements is critical to specifying self-lubricating bearings.

Environmental constraints: The environment in which the bearing will operate also impacts its maintenance-free capability. Operation in areas with high particulate counts or excessive grease and grime, for example, may require some bearing maintenance, but this can be kept to a minimum. For example, using a solid lubricant that is a mixture of polymers, oils and select additives can reduce the penetration of dirt, grit and liquids into the ball path, preventing premature failures.

Installing the self-lubricating blocks with optional accessories can provide even greater protection from environmental assault. Stainless steel scrapers help push larger dirt particles, metal shavings or chips away from seals. Standard bellows can cover a rail for additional protection from particulates as well as splashes.

Total cost of ownership: While purchase price of a self-lubricating bearing might be 10 to 30% higher than the cost of a bearing requiring manual lubrication, the reduced labour costs, elimination of need for lubrication assemblies, improved performance, and reduced downtime, more than compensates for it. Poor lubrication is implicated in half of all bearing failures.

Self-lubricating pillow block assemblies, open or closed, are commonly available with loads ranging from 1110N to 17800N but can be customised. Pillow blocks can be integrated in the factory or retrofitted.

With inadequate lubrication being the most common and readily preventable cause of reduced bearing life and failure, the more cost effectively you can optimise the lubrication process, the more bottom-line impact you will enjoy. In addition to maintenance savings and longer life, the lube-free bearings eliminate the need for expensive lubrication systems and the cost of lubricant itself, promising more environment-friendly operation.

By considering the factors mentioned above early on in the process, maintenance costs can become one less thing motion control users will have to worry about as they automate critical processes.

Download pdf

Latest news about Bearings and slides

Additional Information
Text styles