Industrial Technology
Document
Share
Industrial Technology - Linked-in Industrial Technology - Twitter Industrial Technology - News Feed
Latest Issue
Diary and Events

Industry 4.0 Summitt

Manchester Central (M2 3GX)

28/02/2018 - 01/03/2018

Industry 4.0, the 4th industrial revolution, smart manufacturing, digital factories…these are (more)

Drives & Controls 2018

NEC, Birmingham(B40 1NT)

10/04/2018 - 12/04/2018

Drives & Controls exhibition is recognised as the UK’s leading show for Automation, Power (more)

UKIVA Machine Vision Conference

Arena MK(MK1 1ST)

16/05/2018

Following a successful launch in 2017, UKIVA Machine Vision Conference returns to Arena MK, Milton Keynes, (more)

The case for split roller bearings

The case for split roller bearings Many businesses are focussing on reducing production costs. In situations where large pieces of rotating equipment are in use, significant savings can be achieved by introducing SRB split roller bearings. Unlike solid bearings, SRB split roller bearings are totally split to the shaft; a design that both simplifies and expedites installation and significantly cuts downtime costs in comparison to replacing solid bearings of a similar size.

SRB split roller bearings allow the shaft to be supported by the lower section of the bearing and housing whilst the upper section of the housing and the bearing outer race can be removed. This makes bearing inspection fast and simple, without the need to disconnect drives or lift the shaft. This intrinsic feature is especially valuable regarding large rotating machines, where sheer weight and size can be a barrier to fast and effective servicing.

Companies are increasingly embracing the fact that to achieve performance gains they must first achieve improved production efficiencies. To achieve these longer term efficiencies it may be more cost-effective to specify components that initially cost a little more, but will reduce maintenance and repair costs during their long service life, therefore offering the customer a lower 'whole life cost' and reducing the total cost of ownership (TCO). It is the classic case where the component with the lowest initial price, often does not offer the customer the lowest lifetime cost.

It is understandable that during the specification stages of a new project, an OEM may choose to make short term savings by specifying the most inexpensive bearing for the application. However it is important that the end-user considers whole life costs, specifically the cost of downtime for inspection, maintenance and replacement

Understanding the application and its maintenance requirements are crucial in making the best decision with regard to the design of the bearings used. In the first instance determining the type of load, axial or radial, is important to ensure that the correct design of bearing is selected, along with the sealing requirements and issues such as potential misalignment. Usually, for critical bearings in large rotating equipment, regular scheduled inspections are required, which can result in considerable periods of down time.

With SRB split roller bearings, the spherical location between the bearing housing and the support pedestal ensures that under conditions of shaft misalignment, and irrespective of the type of seal used, the seal always remains concentric to the shaft. As a result, SRB split roller bearings perform exceptionally well in harsh operating conditions, even with severe shaft misalignment, whereas solid mounted spherical roller bearings can suffer from non-concentric ineffective seals that can rapidly lead to expensive premature bearing failure.

The benefits that can be derived from installing SRB split roller bearings are clear, and often the key decision is to determine the correct design and seal arrangement for the application in question. Considering the potential savings that can be made, it is recommended to seek advice from an expert who has the experience and understanding of the issues influencing bearing selection, design and operation.
Download pdf
Revolvo

Latest news about Bearings and slides

Additional Information
Text styles