Share
Industrial Technology - Linked-in Industrial Technology - Twitter Industrial Technology - News Feed
Latest Issue
Diary and Events

PPMA Show 2020

NEC, Birmingham(B40 1NT)

29/09/2020 - 01/10/2020

PPMA Show 2020 is the UK’s largest ever event dedicated to state-of-the-art processing and packaging (more)

Advanced Engineering 2020

NEC, Birmingham(B40 1NT)

04/11/2020 - 05/11/2020

The UK's largest annual advanced manufacturing trade show, Advanced Engineering is your opportunity to (more)

Drives & Controls Exhibition

NEC, Birmingham(B40 1NT)

25/01/2021 - 27/01/2021

The show brings together key suppliers of state-of-the-art equipment representing the multi-tasking culture (more)

Universal torque wrench calibration

Universal torque wrench calibration

When developing a new torque wrench calibration machine, Advanced Witness Systems (AWS) turned to Igus for its low friction plain bearing, drylin linear drives and cable management systems. The design project, which took only 18 months to complete, enables AWS to offer calibration accredited laboratories and large OEMs the most advanced and truly universal torque wrench calibration machine in the world.

Based in Banbury, Oxfordshire, AWS is a leading designer of torque transducers, instrumentation control systems, calibration apparatus and certification software programs. Its pedigree traces back more than 40 years to managing director Ron Sangster who has been involved in developing national and international torque standards as well as national standard calibration machines. While consulting for the National Physical Laboratory he designed the Master 2kNm torque calibration machine, which has been proven to be one of the most accurate torque calibration machines in the world.

“Torque wrench calibration machines are generally intended for a specific manufacturers’ products,” says Sangster. “For laboratories and OEMs this can be a real nuisance, requiring several different machines to cover each torque wrench manufacturer – which can be expensive and takes up a lot of bench space.”

Sangster’s aim therefore was to develop a truly universal machine, able to meet the ISO6789:2017 manual torque tool standard, that would be able to guarantee the absolute and consistent accuracy of any torque wrench, be it a tool for use with bone screws used in prosthetic surgery, a click torque wrench for tightening a car’s wheel nuts or a torque wrench used for aviation, construction and heavy machinery assembly. He also wanted the machine to operate quietly and require as little maintenance as possible. “Technicians appreciate using quiet equipment in their labs; unwanted background noise can be annoying,” he explains. “They also do not want to have to regularly maintain their equipment – long life and high reliability are therefore other key criteria.”

On searching the market for low maintenance and low friction bushings and bearings, linear drive systems and cable management systems, designers at AWS contacted Igus. “We received a high level of technical support from Igus, as well as many samples from the Igus iglidur bearing, drylin E linear drives and e-chain ranges, to realise the initial design concept for the machine,” adds Sangster. Initially the focus was to accommodate torque wrenches requiring forces up to 50kg applied to the handle, but during the 18-month design project Sangster discovered ones that required a mammoth 110kg force. “We needed to beef up the machine dramatically; the original drives could not cope and there was too much friction on the bearings. To overcome these issues, we worked with Igus adding in a gearbox, larger linear crosstrack and modifying the bearings.”

The result is the AWS Universal Torque Wrench Calibration Machine (UTWCM), which provides an efficient and cost-effective means of calibrating and testing manually operated torque wrenches to international or company specific standards and specifications. It is designed to calibrate and test wrenches up to 2,500Nm and equivalents. The benefit of using the machine is that it removes the need for operators to manually apply, at the right speeds, high forces when calibrating large torque wrenches. Instead, the machine applies the force using AWS proprietary firmware, a stepper motor and linear guide system.

Available with either semi- or fully-automated operation, the UTWCM applies the force to the tool via a linear carriage stepper motor and a proprietary microcontroller. This set-up assists in minimising the parasitic forces applied to the torque wrench handle. The machine can be used with the latest AWS Kepler software, Kepler 4, to speed up completion of the calibration and certification process to comply with ISO 6789:2017, ISO 6789:2003 or type approval requirements for manufacturers.

The fully-automated UTWCM uses AWS Intelligent Inline Torque Transducers (IITTs) and the AWS Professional Transducer Display (PTD) to provide feedback to the microcontroller, automatically detecting a first peak signal for setting type wrenches, stopping the machine and returning to zero, greatly speeding up the calibration process and reducing operator input. With indicating wrenches, the operator stops the machine when the torque wrench displays the target torque. An optional transducer switch box keeps AWS IITTs powered up continually, allowing quick changeover between transducers. The semi-automatic version relies on the operator to instruct the machine as to when 80% of the target torque has been reached, so that the machine slows to the correct rate, and to stop the machine when the target torque is reached.

The built-in microcontroller controls the accuracy of the load applied and operation speeds of which there are four settings for different ranges of tools. This ensures the adherence to the minimum target torque approach times, complying to the ISO standard, for the capacity of wrench being calibrated. Multiple safety features ensure that the machine, transducers and torque wrench are not overloaded in operation or over driven due to a wrench fault. Since the launch of UTWCM a few months ago, the company has sold all that it has built so far with new orders coming in quickly. “We were given great technical support from Igus throughout the design project journey,” Sangster concludes.

Download pdf

Other News from Igus (UK) Ltd

Low cost automation for gears

Latest news about Linear acctuators

Additional Information
Text styles