Posted to News on 12th Sep 2009, 00:00
Safety controllers made simple
When you want a straightforward safety controller that's safe, easy to use and won't cost an arm and a leg, an IDEC SafetyOne FS1A safety controller is the best solution. Unlike a multiple safety relay system, which requires cumbersome wiring and takes up too much space, or safety PLCs that can be costly and difficult to program, our safety controllers make it easy to consolidate safety circuits. At the same time they meet safety requirements, save space with minimal wiring and cost customers less money.
SafetyOne can replace up to six safety relay modules with no programming. Easily configure by turning on a dip switch to 1 of 8 pre-defined logic circuits and one module can connect with various IDEC safety and non safety components such as Emergency Stop switches, Interlock Switches, pilot lights, sensors and light curtains (muting function can be set for the light curtain).
With 7 dual channel safety inputs, 4 safety outputs and multiple non safety inputs, monitor, blanking and solenoid drive outputs, SafetyOne can simplify your complete safety and logic circuit. Easy to read LED indicators give notification of error and I/O status and selectable time delays of between 0 to 30 seconds can be set on the outputs.
FS1A is UL listed, TUV rated and CE marked, as well as meets IEC 61508 integrity level 3, ISO 13849-1 performance level e and EN954-1 safety category 4. There are options for up to eight logic circuits, connect to Estops, interlock switches, enabling/grip switches, light curtains, sensors and muting lamps.
Sys-Tek (System Technology Ltd)
Outlands Cottage
Offley Brook
ST21 6HA
UNITED KINGDOM
+44 (0)330 1200 246
