Solve machine setting issues using cylinder sensor technology

The latest technological advances in solid-state cylinder technology enable maintenance or service engineers to solve multiple pneumatic or electric drive issues with a single device, according to industrial automation specialist Festo.

Modern automation machinery uses positional feedback to trigger sequential movements. In pneumatic applications, this takes the form of cylinder sensors that detect the position of the piston within the actuator. Similarly, the sensors act as movement reference points in electric axes and prevent clashes or over-runs.

“Solid-state switches are today's default technology option,” says Steve Sands, head of product management at Festo GB. “Their absence of moving, mechanical components gives them a long lifespan, with mean time between failure (MTBF) of more than 4000 years. This means solid-state switches are the technology of choice over traditional reed switches in around 90% of pneumatic and electric drive applications.”

Solid-state sensors are typically constructed with four magneto resistive sensors connected in a Wheatstone bridge. When the cylinder piston magnet reaches the solid-state switch, the individual sensors’ resistance changes, altering the bridge voltage. After amplification and processing, this creates an output signal from the solid-state sensor. As a result, solid-state sensors are protected against overload, reverse polarity and short circuits. They are also immune to wear and tear and insensitive to inductive and capacitive loads. Typically, the maximum current is 100 mA, and the maximum cable length is 30 m.

Festo says its latest solid-state sensors have moved the technology on another step. The Festo SDBT-MSX incorporates Hall effect sensors and a micro-controller that enable approximate setting of the sensor, with the actual switching point being ‘self-taught’ by cycling the actuator a few times. This means that the actuator is driven to its end positions and the sensor learns the required switching point. Adopting this technology saves set-up and commissioning times and means a person doesn't have to enter inside the machinery whilst the power is on, reducing risk.

Incorporating a micro-controller also means that the sensor’s functions – NPN or PNP switching, Normally Open or Normally Closed switching, or output signal duration – can be modified easily, meaning maintenance or service engineers can solve multiple issues with a single device.

Click here for more information about Festo’s cylinder switch range.

Festo

Abbey House
282 Farnborough Road
Farnborough
GU14 7NA
UNITED KINGDOM

01252 775053

info_gb@festo.com

www.festo.co.uk

More products
Farnell, NXP and Doulos present new Industry 4.0 webinar
Farnell has announced the launch a new global webinar covering ‘Automation and Edge AI for Industry 4.0’ in partnership with the Element14 Community, NXP and Doulos on Wednesday 24 August.
Needle valves receive ISO 15848-1 Class C low emissions certification
Parker Hannifin is unveiling a series of valves tested to ISO 15848-1 Class C, a standard that sets out the measurement, test and qualification procedures for fugitive emissions from industrial valves.
Thorite offers same-day hydraulic hose assembly service
Air and fluid power specialist Thorite has launched a same-day hydraulic hose assembly service to help customers reduce downtime and control costs.
Festo demonstrates bioreactor for large-scale photosynthesis of algae
Festo presented the PhotoBionicCell research project at the Hannover Fair – a bioreactor that enables the efficient and large-scale photosynthesis of algae.
Actuator increases accuracy and productivity of bagging machine
When end users of a precision bagging machine started using economical bags with inconsistent sizes, this impacted accuracy and productivity of the bulk bagging process.
World’s first e-chain made of 100% recycled material
Conserving resources and extending the product life cycle are the objectives of the new Igus cradle-chain E2.1.CG, which the company says saves 28% CO2 versus current e-chain production.
Siemens Congleton factory accelerates towards net zero goal
Siemens’ Congleton factory is on track to achieve carbon neutrality this year – eight years ahead of its original target.
Full speed ahead for a custom conversion
A vision for a customised camper van led Leigh McCarron to Minitec UK. Working together to Leigh realise his dream, Minitec advised on the choice of profile that would turn an old transporter vehicle into a customised ‘king of the road’ camper van.
Inductive sensors prove a ‘jack of all trades’ in bridge construction
When a specialist assembler of prefabricated bridges needed a rugged sensor for position sensing on its hydraulic cylinders, it turned to Contrinex.
Digital tools to support engineering design
Nowadays in engineering, digital tools are an essential part of a design engineer’s daily life and any tools that are available freely are naturally an added bonus.

Login / Sign up