Stromag rail clamps help Kümsan Cranes to build new bridge

The replacement A40 Neuenkamp Duisburg Bridge, currently under construction in Germany, will support the future prosperity of the industrial Ruhr region by widening this crucial highway over the Rhine. The landmark project is being supported in part by Stromag, which supplied retractable rail clamps to fit the KM Kümsan overhead cranes lifting the large prefabricated bridge sections into position.

The original A40 Neuenkamp Duisburg Bridge was completed in 1971. Designed to carry 30,000 vehicles a day from the A40 autobahn, in recent times the bridge has had to cope with up to 110,000 a day, including a large quantity of trucks. With this increased usage, and following multiple structural repairs, Germany’s motorway authority has embarked on a €340 million project to replace the aging bridge with a new eight lane 802 m long cable stayed bridge. When complete, it will be the longest in the country. The 71 m high structure will offer the capacity to carry up to 150,000 vehicles a day with a design life of up to a century, helping to support future economic growth in the area.

An innovative construction method has been employed to minimise disturbance to road and river traffic. The first span of the new bridge will be built alongside the original, with prefabricated sections moved into position across the river. The original bridge will then be dismantled and replaced with a second span. Finally, the first span will then be ‘slid’ sideways to sit closely to the second span. This allows road traffic to continue to cross the river during the project.

This construction process relies on the use of large prefabricated steel sections which are assembled and lifted into position by overhead cranes running on rails. Leading crane manufacturer KM Kümsan Cranes, together with project developer OVM Engineering, was ordered to provide four 50 t, 32 m span capacity gantry cranes to support the bridge building production process. To ensure that the cranes stayed in position on the rails during operation and parking, the OEM contacted Stromag to provide retractable rail clamps for reliable braking performance.

Rail clamps, also known as storm brakes, generate holding force at the crane rails to prevent uncontrolled movement of the crane due to gusts of wind. It is imperative that rail clamps offer reliability, a stable brake friction coefficient and can operate in a wide variety of conditions.

Stromag, a leading brand of Altra Industrial Motion, is a global provider of power transmission solutions to the crane sector, with a specialty in heavy-duty braking technology. The business provides a range of storm brakes to meet varying overhead crane requirements, offering the capability to provide bespoke designs to meet specific needs.

Ünver Ünlü, business development manager at Stromag, comments: “We recommended oversized RRBS retractable rail clamps with in-built Hydraulic Power Packs (HPUs) to KM Kümsan for use on the cranes. To adhere to the bridge construction schedule, it was important that we could provide the multitude of clamps within a tight schedule. We were able to deliver the customised units to KM Kümsan ahead of time and exactly to specification, ensuring that construction work could begin smoothly.

“Our rail clamps offer high power density in operation, with forces ranging from 100 kN to 1200 kN. Frictions pads are designed and arranged to provide a stable brake friction coefficient across a range of temperatures, which ensures consistent performance in varied environments.

“Rail clamp designs are tailored to offer up to 50 mm vertical and horizontal float to meet the needs of curved rails, which means an optimum solution for each application,” Ünver continues.

“For retrofit projects, we even can dial in float to accommodate rails that have become squashed and ‘mushroomed’ over prolonged use. We also have the ability to manufacture rail clamps with special bolt patterns to fit crane OEM designs. This flexibility to provide designs that are specialised to maximise performance means our rail clamps offer the utmost reliability across varying operating conditions.”

Stromag provides proof of performance for all its rail clamps thanks to extensive in-house testing of designs. The rail profile of each project is replicated in brake tests, ensuring accurate results. This ensures rail clamps will operate exactly as intended once installed.

With construction work on the A40 Neuenkamp Duisburg Bridge expected to be completed by 2026, soon cars and trucks will be able to cross the Rhine easier than ever before, helping to safeguard the future economic growth of the Ruhr industrial zone.

Altra Industrial Motion

300 Granite St
Suite 201

001 781 917 0600

More news
PI increases production space at HQ by 11,000 sq ft
Rising global demand for semiconductor chips requires investments in equipment that is needed for chip production. To meet these needs, ultra-precision motion control, nanopositioning, and precision automation equipment Physik Instrumente (PI) has increased its production space.
Farnell, NXP and Doulos present new Industry 4.0 webinar
Farnell has announced the launch a new global webinar covering ‘Automation and Edge AI for Industry 4.0’ in partnership with the Element14 Community, NXP and Doulos on Wednesday 24 August.
Needle valves receive ISO 15848-1 Class C low emissions certification
Parker Hannifin is unveiling a series of valves tested to ISO 15848-1 Class C, a standard that sets out the measurement, test and qualification procedures for fugitive emissions from industrial valves.
Thorite offers same-day hydraulic hose assembly service
Air and fluid power specialist Thorite has launched a same-day hydraulic hose assembly service to help customers reduce downtime and control costs.
Festo demonstrates bioreactor for large-scale photosynthesis of algae
Festo presented the PhotoBionicCell research project at the Hannover Fair – a bioreactor that enables the efficient and large-scale photosynthesis of algae.
Actuator increases accuracy and productivity of bagging machine
When end users of a precision bagging machine started using economical bags with inconsistent sizes, this impacted accuracy and productivity of the bulk bagging process.
World’s first e-chain made of 100% recycled material
Conserving resources and extending the product life cycle are the objectives of the new Igus cradle-chain E2.1.CG, which the company says saves 28% CO2 versus current e-chain production.
Siemens Congleton factory accelerates towards net zero goal
Siemens’ Congleton factory is on track to achieve carbon neutrality this year – eight years ahead of its original target.
Full speed ahead for a custom conversion
A vision for a customised camper van led Leigh McCarron to Minitec UK. Working together to Leigh realise his dream, Minitec advised on the choice of profile that would turn an old transporter vehicle into a customised ‘king of the road’ camper van.
Inductive sensors prove a ‘jack of all trades’ in bridge construction
When a specialist assembler of prefabricated bridges needed a rugged sensor for position sensing on its hydraulic cylinders, it turned to Contrinex.

Login / Sign up