Delta's automation solutions have played a pivotal role in enhancing the production capabilities of Tecnobox, a box forming machinery company in Spain. This transformation has not only fortified Tecnobox's position in a competitive market, but it has also set new standards in the industry for technological advancement and environmental responsibility.
10th May 2024
The precision of LOCTITE adhesive application technology has transformed the speed and accuracy for component manufacturer NEL Technologies.
23rd April 2024
Apex Hydraulics was approached by a client that had been partnering for many years with a local steel rolling mill. As machine designers, they had been commissioned to redesign, manufacture and install a new steel plate shear press with cutting plate.
10th April 2024
Swiss coffee machine manufacturer Eversys relies on diaphragm gas pumps from KNF in its E’Line and CAMEO series machines to produce Barista quality milk foam using a compressed air supply.
10th April 2024
When a company required a pallet circulation system for the production of gate valves for water pipes, it turned to mk Profile Systems.
19th February 2024
In 2014, the factory of food manufacturer Refineria del Centro was extended with a new line to produce baker’s yeast. When searching for trustable suppliers, the client favoured those making reliable and safe equipment. For the aeration of the fermentation tanks, Sulzer was chosen to provide six completely oil-free HST turbocompressors. This has since been proven to be a winning choice.
5th February 2024
Smart 2D profile sensors from Baumer are playing a key role in an automated sandwich and filled rolls production line at Germany company Weber Maschinebau. Baumer’s OXM 2D sensor provides precise edge control and positioning data, and delivers the calculated coordinates correctly in the units required.
19th January 2024
K-Parts, a leading online supplier of scooter, moped and motorbike parts, has chosen robots from automation expert Prime Vision to streamline its warehouse logistics operations at Harderwijk in the Netherlands.
15th December 2023
STOBER has enhanced its One Cable Solution (OCS) so that users can now connect motors and drive controllers at distances of up to 100 using the EnDat 3 protocol from Heidenhain. The new single cable connection means that machine builders no longer need to use two cables to power the motor and transmit encoder data. It can all be done with this one hybrid cable.
14th December 2023