Industrial Technology

Elastic technical components enjoy growing success

Christian Bauer disc springs are manufactured to the tolerances, material specifications and performance parameters of DIN 2093, provide highly reliable 'elastic' technical components which can form the building block elements of spring packs. Under applied load or torque, the spring yields with a defined and repeatable deformation, while an opposing reaction force is at the same time stored as energy within the spring.

30th January 2008

Solvents or adhesives?

Solvent bonding has been a popular joining method for many years. But there are issues that call into question its continuing acceptance. In the January 2008 issue of Industrial Technology, Bob Goss of Henkel, maker of Loctite brand products, looks at the viable alternatives.

27th December 2007

Getting stuck into the Love Truck

The problem involved a painted steel substrate, hand placed glass/ceramic tiles, substrate flexing and widely varying vibration over extended periods in outdoor conditions - in short a Tiki Love Truck! An unusual project for Intertronics but nonetheless well within the capabilities of the Adhere IRS 2125 flexible epoxy adhesive.

27th December 2007

Ultrasonic metal welding

Contax has entered into an exclusive agreement with ultrasonic specialist, Telsonic UK to distribute its ultrasonic metal welding equipment throughout the UK for the wire and contact industry. These products are ideally suited to the automotive industry, or other manufacturing environments that use wire harness applications.

27th December 2007

Nanosilica filled UV curable reinforced epoxy

A new nanosilica filled one component UV curable epoxy called UV22 has been introduced by Master Bond. This compound has been developed for coating, sealing and encapsulation applications. It features superb abrasion resistance, excellent optical clarity, low shrinkage and high physical strength properties.

27th December 2007

Speaking of bonding...

Adhesives are used extensively in the manufacture of loudspeakers - but just what does the bonding process involve? In the November 2007 issue of Industrial Technology, we asked an expert to help us through the process.

23rd November 2007

Rivet nut hand tool is both robust and low cost

If you're looking for a single tool to install a wide range of both rivet nuts and rivet studs, that combines low cost with ease of use, then this new hand tool with its unique spin/spin action could be just the job. We report in full in the November 2007 issue of Industrial Technology.

23rd November 2007

Lasers provide high precision welding and cutting performance

Demanding and high precision welding and cutting applications on thin metal sheet or foil materials are now faster, simpler and more efficient following the introduction of the new StarFibre series of lasers from Rofin-Baasel. The StarFibre series offers laser sources of either 100W or 200W nominal output power with fundamental mode beam quality, and can be used in either pulsed or cw mode. This combination of high beam quality, choice of power and operational mode selection means that the StarFibre series lasers can be used for a broad spectrum of precision welding and cutting applications.

23rd November 2007

Christmas tree clip fasteners

Micro Plastics has expanded its range of Christmas Tree type fasteners to include over 50 new standard sizes, with eight special item clips. In addition, a metric line of over 20 sizes is also now available. These uniquely designed fastening snap-in clips feature a unique ribbed shank that ensures fast and easy installation.

23rd November 2007

Snap cure breakthrough epoxy

Master Bond says its new Supreme65HT-6 represents a breakthrough in epoxy adhesive technology, providing a hitherto unattainable balance of processing strengths. Supreme65HT-6 T is a two component, adhesive formulated to cure quickly at ambient temperatures. It produces exceptionally good performance bonds with tensile lap shear strengths in excess of 3000psi for service in the remarkably wide temperature range of below -62degC to over 204degC. It offers superior resistance to thermal shock, vibration and stress fatigue cracking while maintaining the moisture, creep, corrosion and thermal resistance typical of epoxy resin adhesives.

23rd November 2007

Fastening

Elastic technical components enjoy growing success

Solvents or adhesives?

Getting stuck into the Love Truck

Ultrasonic metal welding

Nanosilica filled UV curable reinforced epoxy

Speaking of bonding...

Rivet nut hand tool is both robust and low cost

Lasers provide high precision welding and cutting performance

Christmas tree clip fasteners

Snap cure breakthrough epoxy